[PATCH ath-next v4 4/8] wifi: ath12k: add device DP stats reset support via debugfs
Pardeep Kaur
pardeep.kaur at oss.qualcomm.com
Tue Aug 18 22:32:43 PDT 2026
From: Hariharan Ramanathan <hariharan.ramanathan at oss.qualcomm.com>
There is no way to reset device DP stats counters without reloading
the driver, making it difficult to isolate issues to a specific time
window during debugging.
Add a write handler to the device_dp_stats debugfs file so that
writing 'reset' clears all device DP stats counters. Change the file
mode from 0400 to 0600 to allow write access. Use
simple_write_to_buffer() to correctly handle partial writes and
non-zero ppos, consistent with ath12k_write_simulate_fw_crash() in
No lock is taken around the memset since the counters are updated
locklessly in the datapath; taking dp_lock would be misleading as it
does not protect device_stats updates.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6.r1-00402-QCAHKSWPL_SILICONZ-1
Signed-off-by: Hariharan Ramanathan <hariharan.ramanathan at oss.qualcomm.com>
Co-developed-by: Pardeep Kaur <pardeep.kaur at oss.qualcomm.com>
Signed-off-by: Pardeep Kaur <pardeep.kaur at oss.qualcomm.com>
---
drivers/net/wireless/ath/ath12k/debugfs.c | 34 ++++++++++++++++++++++-
1 file changed, 33 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/debugfs.c b/drivers/net/wireless/ath/ath12k/debugfs.c
index ec49692107a8..68acb4cb9c4f 100644
--- a/drivers/net/wireless/ath/ath12k/debugfs.c
+++ b/drivers/net/wireless/ath/ath12k/debugfs.c
@@ -1220,8 +1220,40 @@ static ssize_t ath12k_debugfs_dump_device_dp_stats(struct file *file,
return ret;
}
+static ssize_t
+ath12k_debugfs_write_device_dp_stats(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath12k_base *ab = file->private_data;
+ struct ath12k_dp *dp = ath12k_ab_to_dp(ab);
+ struct ath12k_device_dp_stats *device_stats = &dp->device_stats;
+ char buf[20] = {};
+ int ret;
+
+ /* filter partial writes and invalid commands */
+ if (*ppos != 0 || count >= sizeof(buf) || count == 0)
+ return -EINVAL;
+
+ ret = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count);
+ if (ret < 0)
+ return ret;
+
+ /* drop the possible '\n' from the end */
+ if (buf[*ppos - 1] == '\n')
+ buf[*ppos - 1] = '\0';
+
+ if (!strcmp(buf, "reset")) {
+ memset(device_stats, 0, sizeof(*device_stats));
+ return count;
+ }
+
+ return -EINVAL;
+}
+
static const struct file_operations fops_device_dp_stats = {
.read = ath12k_debugfs_dump_device_dp_stats,
+ .write = ath12k_debugfs_write_device_dp_stats,
.open = simple_open,
.owner = THIS_MODULE,
.llseek = default_llseek,
@@ -1232,7 +1264,7 @@ void ath12k_debugfs_pdev_create(struct ath12k_base *ab)
debugfs_create_file("simulate_fw_crash", 0600, ab->debugfs_soc, ab,
&fops_simulate_fw_crash);
- debugfs_create_file("device_dp_stats", 0400, ab->debugfs_soc, ab,
+ debugfs_create_file("device_dp_stats", 0600, ab->debugfs_soc, ab,
&fops_device_dp_stats);
}
--
2.34.1
More information about the ath12k
mailing list