[PATCH v4 10/15] drm/msm: Switch to generic PAS TZ APIs

[Mukesh Ojha]

On Mon, Apr 27, 2026 at 03:25:58PM +0530, Sumit Garg wrote:
> From: Sumit Garg <sumit.garg at oss.qualcomm.com>
> 
> Switch drm/msm client drivers over to generic PAS TZ APIs. Generic PAS
> TZ service allows to support multiple TZ implementation backends like QTEE
> based SCM PAS service, OP-TEE based PAS service and any further future TZ
> backend service.
> 
> Acked-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
> Signed-off-by: Sumit Garg <sumit.garg at oss.qualcomm.com>
> ---
>  drivers/gpu/drm/msm/Kconfig             |  1 +
>  drivers/gpu/drm/msm/adreno/a5xx_gpu.c   |  4 ++--
>  drivers/gpu/drm/msm/adreno/adreno_gpu.c | 11 ++++++-----
>  3 files changed, 9 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gdrivers/gpu/drm/msm/Kconfigpu/drm/msm/Kconfig
> index 250246f81ea9..09469d56513b 100644
> --- a/drivers/gpu/drm/msm/Kconfig
> +++ b/drivers/gpu/drm/msm/Kconfig
> @@ -21,6 +21,7 @@ config DRM_MSM
>  	select SHMEM
>  	select TMPFS
>  	select QCOM_SCM

do we need this ?

> +	select QCOM_PAS
>  	select QCOM_UBWC_CONFIG
>  	select WANT_DEV_COREDUMP
>  	select SND_SOC_HDMI_CODEC if SND_SOC
> diff --git a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> index 79acae11154a..b556da823897 100644
> --- a/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a5xx_gpu.c
> @@ -5,7 +5,7 @@
>  #include <linux/kernel.h>
>  #include <linux/types.h>
>  #include <linux/cpumask.h>
> -#include <linux/firmware/qcom/qcom_scm.h>
> +#include <linux/firmware/qcom/qcom_pas.h>
>  #include <linux/pm_opp.h>
>  #include <linux/nvmem-consumer.h>
>  #include <linux/slab.h>
> @@ -653,7 +653,7 @@ static int a5xx_zap_shader_resume(struct msm_gpu *gpu)
>  	if (adreno_is_a506(adreno_gpu))
>  		return 0;
>  
> -	ret = qcom_scm_set_remote_state(SCM_GPU_ZAP_SHADER_RESUME, GPU_PAS_ID);
> +	ret = qcom_pas_set_remote_state(SCM_GPU_ZAP_SHADER_RESUME, GPU_PAS_ID);
>  	if (ret)
>  		DRM_ERROR("%s: zap-shader resume failed: %d\n",
>  			gpu->name, ret);
> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> index 66f80f2d12f9..6d68edf0578c 100644
> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c
> @@ -8,6 +8,7 @@
>  
>  #include <linux/ascii85.h>
>  #include <linux/interconnect.h>
> +#include <linux/firmware/qcom/qcom_pas.h>
>  #include <linux/firmware/qcom/qcom_scm.h>

do we need this ?

>  #include <linux/kernel.h>
>  #include <linux/of_reserved_mem.h>
> @@ -146,10 +147,10 @@ static int zap_shader_load_mdt(struct msm_gpu *gpu, const char *fwname,
>  		goto out;
>  
>  	/* Send the image to the secure world */
> -	ret = qcom_scm_pas_auth_and_reset(pasid);
> +	ret = qcom_pas_auth_and_reset(pasid);
>  
>  	/*
> -	 * If the scm call returns -EOPNOTSUPP we assume that this target
> +	 * If the pas call returns -EOPNOTSUPP we assume that this target
>  	 * doesn't need/support the zap shader so quietly fail
>  	 */
>  	if (ret == -EOPNOTSUPP)
> @@ -175,9 +176,9 @@ int adreno_zap_shader_load(struct msm_gpu *gpu, u32 pasid)
>  	if (!zap_available)
>  		return -ENODEV;
>  
> -	/* We need SCM to be able to load the firmware */
> -	if (!qcom_scm_is_available()) {
> -		DRM_DEV_ERROR(&pdev->dev, "SCM is not available\n");
> +	/* We need PAS to be able to load the firmware */
> +	if (!qcom_pas_is_available()) {
> +		DRM_DEV_ERROR(&pdev->dev, "Qcom PAS is not available\n");
>  		return -EPROBE_DEFER;
>  	}
>  
> -- 
> 2.51.0
> 

Reviewed-by: Mukesh Ojha <mukesh.ojha at oss.qualcomm.com> 

-- 
-Mukesh Ojha