[PATCH v4 03/15] firmware: qcom_scm: Migrate to generic PAS service
Mukesh Ojha
mukesh.ojha at oss.qualcomm.com
Wed Apr 29 03:48:41 PDT 2026
On Mon, Apr 27, 2026 at 03:25:51PM +0530, Sumit Garg wrote:
> From: Sumit Garg <sumit.garg at oss.qualcomm.com>
>
> With the availability of generic PAS service, let's add SCM calls as
> a backend to keep supporting legacy QTEE interfaces. The exported
> qcom_scm* wrappers will get dropped once all the client drivers get
> migrated as part of future patches.
>
> Signed-off-by: Sumit Garg <sumit.garg at oss.qualcomm.com>
> ---
> drivers/firmware/qcom/Kconfig | 1 +
> drivers/firmware/qcom/qcom_scm.c | 335 ++++++++++++++-----------------
> 2 files changed, 155 insertions(+), 181 deletions(-)
>
> diff --git a/drivers/firmware/qcom/Kconfig b/drivers/firmware/qcom/Kconfig
> index 8653639d06db..9a12ae2b639d 100644
> --- a/drivers/firmware/qcom/Kconfig
> +++ b/drivers/firmware/qcom/Kconfig
> @@ -15,6 +15,7 @@ config QCOM_PAS
> TEE bus based PAS service implementation.
>
> config QCOM_SCM
> + select QCOM_PAS
> select QCOM_TZMEM
> tristate
>
> diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
> index 9b06a69d3a6d..d87a962e93da 100644
> --- a/drivers/firmware/qcom/qcom_scm.c
> +++ b/drivers/firmware/qcom/qcom_scm.c
> @@ -13,6 +13,7 @@
> #include <linux/dma-mapping.h>
> #include <linux/err.h>
> #include <linux/export.h>
> +#include <linux/firmware/qcom/qcom_pas.h>
> #include <linux/firmware/qcom/qcom_scm.h>
> #include <linux/firmware/qcom/qcom_tzmem.h>
> #include <linux/init.h>
> @@ -33,6 +34,7 @@
>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
>
> +#include "qcom_pas.h"
> #include "qcom_scm.h"
> #include "qcom_tzmem.h"
>
> @@ -479,25 +481,6 @@ void qcom_scm_cpu_power_down(u32 flags)
> }
> EXPORT_SYMBOL_GPL(qcom_scm_cpu_power_down);
>
> -int qcom_scm_set_remote_state(u32 state, u32 id)
> -{
> - struct qcom_scm_desc desc = {
> - .svc = QCOM_SCM_SVC_BOOT,
> - .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
> - .arginfo = QCOM_SCM_ARGS(2),
> - .args[0] = state,
> - .args[1] = id,
> - .owner = ARM_SMCCC_OWNER_SIP,
> - };
> - struct qcom_scm_res res;
> - int ret;
> -
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> -
> - return ret ? : res.result[0];
> -}
> -EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state);
> -
> static int qcom_scm_disable_sdi(void)
> {
> int ret;
> @@ -570,26 +553,12 @@ static void qcom_scm_set_download_mode(u32 dload_mode)
> dev_err(__scm->dev, "failed to set download mode: %d\n", ret);
> }
>
> -/**
> - * devm_qcom_scm_pas_context_alloc() - Allocate peripheral authentication service
> - * context for a given peripheral
> - *
> - * PAS context is device-resource managed, so the caller does not need
> - * to worry about freeing the context memory.
> - *
> - * @dev: PAS firmware device
> - * @pas_id: peripheral authentication service id
> - * @mem_phys: Subsystem reserve memory start address
> - * @mem_size: Subsystem reserve memory size
> - *
> - * Returns: The new PAS context, or ERR_PTR() on failure.
> - */
> struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev,
> u32 pas_id,
> phys_addr_t mem_phys,
> size_t mem_size)
> {
> - struct qcom_scm_pas_context *ctx;
> + struct qcom_pas_context *ctx;
>
> ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> if (!ctx)
> @@ -600,11 +569,12 @@ struct qcom_scm_pas_context *devm_qcom_scm_pas_context_alloc(struct device *dev,
> ctx->mem_phys = mem_phys;
> ctx->mem_size = mem_size;
>
> - return ctx;
> + return (struct qcom_scm_pas_context *)ctx;
> }
> EXPORT_SYMBOL_GPL(devm_qcom_scm_pas_context_alloc);
>
> -static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys,
> +static int __qcom_scm_pas_init_image(struct device *dev, u32 pas_id,
> + dma_addr_t mdata_phys,
> struct qcom_scm_res *res)
> {
> struct qcom_scm_desc desc = {
> @@ -626,7 +596,7 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys,
>
> desc.args[1] = mdata_phys;
>
> - ret = qcom_scm_call(__scm->dev, &desc, res);
> + ret = qcom_scm_call(dev, &desc, res);
> qcom_scm_bw_disable();
>
> disable_clk:
> @@ -635,7 +605,8 @@ static int __qcom_scm_pas_init_image(u32 pas_id, dma_addr_t mdata_phys,
> return ret;
> }
>
> -static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx,
> +static int qcom_scm_pas_prep_and_init_image(struct device *dev,
> + struct qcom_pas_context *ctx,
> const void *metadata, size_t size)
> {
> struct qcom_scm_res res;
> @@ -650,7 +621,7 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx,
> memcpy(mdata_buf, metadata, size);
> mdata_phys = qcom_tzmem_to_phys(mdata_buf);
>
> - ret = __qcom_scm_pas_init_image(ctx->pas_id, mdata_phys, &res);
> + ret = __qcom_scm_pas_init_image(dev, ctx->pas_id, mdata_phys, &res);
> if (ret < 0)
> qcom_tzmem_free(mdata_buf);
> else
> @@ -659,25 +630,9 @@ static int qcom_scm_pas_prep_and_init_image(struct qcom_scm_pas_context *ctx,
> return ret ? : res.result[0];
> }
>
> -/**
> - * qcom_scm_pas_init_image() - Initialize peripheral authentication service
> - * state machine for a given peripheral, using the
> - * metadata
> - * @pas_id: peripheral authentication service id
> - * @metadata: pointer to memory containing ELF header, program header table
> - * and optional blob of data used for authenticating the metadata
> - * and the rest of the firmware
> - * @size: size of the metadata
> - * @ctx: optional pas context
> - *
> - * Return: 0 on success.
> - *
> - * Upon successful return, the PAS metadata context (@ctx) will be used to
> - * track the metadata allocation, this needs to be released by invoking
> - * qcom_scm_pas_metadata_release() by the caller.
> - */
> -int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
> - struct qcom_scm_pas_context *ctx)
> +static int __qcom_scm_pas_init_image2(struct device *dev, u32 pas_id,
> + const void *metadata, size_t size,
> + struct qcom_pas_context *ctx)
> {
> struct qcom_scm_res res;
> dma_addr_t mdata_phys;
> @@ -685,7 +640,7 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
> int ret;
>
> if (ctx && ctx->use_tzmem)
> - return qcom_scm_pas_prep_and_init_image(ctx, metadata, size);
> + return qcom_scm_pas_prep_and_init_image(dev, ctx, metadata, size);
>
> /*
> * During the scm call memory protection will be enabled for the meta
> @@ -699,16 +654,15 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
> * If we pass a buffer that is already part of an SHM Bridge to this
> * call, it will fail.
> */
> - mdata_buf = dma_alloc_coherent(__scm->dev, size, &mdata_phys,
> - GFP_KERNEL);
> + mdata_buf = dma_alloc_coherent(dev, size, &mdata_phys, GFP_KERNEL);
> if (!mdata_buf)
> return -ENOMEM;
>
> memcpy(mdata_buf, metadata, size);
>
> - ret = __qcom_scm_pas_init_image(pas_id, mdata_phys, &res);
> + ret = __qcom_scm_pas_init_image(dev, pas_id, mdata_phys, &res);
> if (ret < 0 || !ctx) {
> - dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
> + dma_free_coherent(dev, size, mdata_buf, mdata_phys);
> } else if (ctx) {
> ctx->ptr = mdata_buf;
> ctx->phys = mdata_phys;
> @@ -717,36 +671,35 @@ int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
>
> return ret ? : res.result[0];
> }
> -EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);
>
> -/**
> - * qcom_scm_pas_metadata_release() - release metadata context
> - * @ctx: pas context
> - */
> -void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx)
> +int qcom_scm_pas_init_image(u32 pas_id, const void *metadata, size_t size,
> + struct qcom_scm_pas_context *ctx)
> {
> - if (!ctx->ptr)
> - return;
> + return __qcom_scm_pas_init_image2(__scm->dev, pas_id, metadata, size,
> + (struct qcom_pas_context *)ctx);
> +}
> +EXPORT_SYMBOL_GPL(qcom_scm_pas_init_image);
>
> +static void __qcom_scm_pas_metadata_release(struct device *dev,
> + struct qcom_pas_context *ctx)
> +{
> if (ctx->use_tzmem)
> qcom_tzmem_free(ctx->ptr);
> else
> - dma_free_coherent(__scm->dev, ctx->size, ctx->ptr, ctx->phys);
> + dma_free_coherent(dev, ctx->size, ctx->ptr, ctx->phys);
>
> ctx->ptr = NULL;
> }
> +
> +void qcom_scm_pas_metadata_release(struct qcom_scm_pas_context *ctx)
> +{
> + __qcom_scm_pas_metadata_release(__scm->dev,
> + (struct qcom_pas_context *)ctx);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_metadata_release);
>
> -/**
> - * qcom_scm_pas_mem_setup() - Prepare the memory related to a given peripheral
> - * for firmware loading
> - * @pas_id: peripheral authentication service id
> - * @addr: start address of memory area to prepare
> - * @size: size of the memory area to prepare
> - *
> - * Returns 0 on success.
> - */
> -int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
> +static int __qcom_scm_pas_mem_setup(struct device *dev, u32 pas_id,
> + phys_addr_t addr, phys_addr_t size)
> {
> int ret;
> struct qcom_scm_desc desc = {
> @@ -768,7 +721,7 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
> if (ret)
> goto disable_clk;
>
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> + ret = qcom_scm_call(dev, &desc, &res);
> qcom_scm_bw_disable();
>
> disable_clk:
> @@ -776,9 +729,15 @@ int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
>
> return ret ? : res.result[0];
> }
> +
> +int qcom_scm_pas_mem_setup(u32 pas_id, phys_addr_t addr, phys_addr_t size)
> +{
> + return __qcom_scm_pas_mem_setup(__scm->dev, pas_id, addr, size);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_mem_setup);
>
> -static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm,
> +static void *__qcom_scm_pas_get_rsc_table(struct device *dev, u32 pas_id,
> + void *input_rt_tzm,
> size_t input_rt_size,
> size_t *output_rt_size)
> {
> @@ -813,7 +772,7 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm,
> * with output_rt_tzm buffer with res.result[2] size however, It should not
> * be of unresonable size.
> */
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> + ret = qcom_scm_call(dev, &desc, &res);
> if (!ret && res.result[2] > SZ_1G) {
> ret = -E2BIG;
> goto free_output_rt;
> @@ -830,51 +789,11 @@ static void *__qcom_scm_pas_get_rsc_table(u32 pas_id, void *input_rt_tzm,
> return ret ? ERR_PTR(ret) : output_rt_tzm;
> }
>
> -/**
> - * qcom_scm_pas_get_rsc_table() - Retrieve the resource table in passed output buffer
> - * for a given peripheral.
> - *
> - * Qualcomm remote processor may rely on both static and dynamic resources for
> - * its functionality. Static resources typically refer to memory-mapped addresses
> - * required by the subsystem and are often embedded within the firmware binary
> - * and dynamic resources, such as shared memory in DDR etc., are determined at
> - * runtime during the boot process.
> - *
> - * On Qualcomm Technologies devices, it's possible that static resources are not
> - * embedded in the firmware binary and instead are provided by TrustZone However,
> - * dynamic resources are always expected to come from TrustZone. This indicates
> - * that for Qualcomm devices, all resources (static and dynamic) will be provided
> - * by TrustZone via the SMC call.
> - *
> - * If the remote processor firmware binary does contain static resources, they
> - * should be passed in input_rt. These will be forwarded to TrustZone for
> - * authentication. TrustZone will then append the dynamic resources and return
> - * the complete resource table in output_rt_tzm.
> - *
> - * If the remote processor firmware binary does not include a resource table,
> - * the caller of this function should set input_rt as NULL and input_rt_size
> - * as zero respectively.
> - *
> - * More about documentation on resource table data structures can be found in
> - * include/linux/remoteproc.h
> - *
> - * @ctx: PAS context
> - * @pas_id: peripheral authentication service id
> - * @input_rt: resource table buffer which is present in firmware binary
> - * @input_rt_size: size of the resource table present in firmware binary
> - * @output_rt_size: TrustZone expects caller should pass worst case size for
> - * the output_rt_tzm.
> - *
> - * Return:
> - * On success, returns a pointer to the allocated buffer containing the final
> - * resource table and output_rt_size will have actual resource table size from
> - * TrustZone. The caller is responsible for freeing the buffer. On failure,
> - * returns ERR_PTR(-errno).
> - */
> -struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx,
> - void *input_rt,
> - size_t input_rt_size,
> - size_t *output_rt_size)
> +static void *__qcom_scm_pas_get_rsc_table2(struct device *dev,
> + struct qcom_pas_context *ctx,
> + void *input_rt,
> + size_t input_rt_size,
> + size_t *output_rt_size)
> {
> struct resource_table empty_rsc = {};
> size_t size = SZ_16K;
> @@ -909,11 +828,12 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c
>
> memcpy(input_rt_tzm, input_rt, input_rt_size);
>
> - output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id, input_rt_tzm,
> + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id,
> + input_rt_tzm,
> input_rt_size, &size);
> if (PTR_ERR(output_rt_tzm) == -EOVERFLOW)
> /* Try again with the size requested by the TZ */
> - output_rt_tzm = __qcom_scm_pas_get_rsc_table(ctx->pas_id,
> + output_rt_tzm = __qcom_scm_pas_get_rsc_table(dev, ctx->pas_id,
> input_rt_tzm,
> input_rt_size,
> &size);
> @@ -943,16 +863,20 @@ struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *c
>
> return ret ? ERR_PTR(ret) : tbl_ptr;
> }
> +
> +struct resource_table *qcom_scm_pas_get_rsc_table(struct qcom_scm_pas_context *ctx,
> + void *input_rt,
> + size_t input_rt_size,
> + size_t *output_rt_size)
> +{
> + return __qcom_scm_pas_get_rsc_table2(__scm->dev,
> + (struct qcom_pas_context *)ctx,
> + input_rt, input_rt_size,
> + output_rt_size);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_get_rsc_table);
>
> -/**
> - * qcom_scm_pas_auth_and_reset() - Authenticate the given peripheral firmware
> - * and reset the remote processor
> - * @pas_id: peripheral authentication service id
> - *
> - * Return 0 on success.
> - */
> -int qcom_scm_pas_auth_and_reset(u32 pas_id)
> +static int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 pas_id)
> {
> int ret;
> struct qcom_scm_desc desc = {
> @@ -972,7 +896,7 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id)
> if (ret)
> goto disable_clk;
>
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> + ret = qcom_scm_call(dev, &desc, &res);
> qcom_scm_bw_disable();
>
> disable_clk:
> @@ -980,28 +904,15 @@ int qcom_scm_pas_auth_and_reset(u32 pas_id)
>
> return ret ? : res.result[0];
> }
> +
> +int qcom_scm_pas_auth_and_reset(u32 pas_id)
> +{
> + return __qcom_scm_pas_auth_and_reset(__scm->dev, pas_id);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_auth_and_reset);
>
> -/**
> - * qcom_scm_pas_prepare_and_auth_reset() - Prepare, authenticate, and reset the
> - * remote processor
> - *
> - * @ctx: Context saved during call to qcom_scm_pas_context_init()
> - *
> - * This function performs the necessary steps to prepare a PAS subsystem,
> - * authenticate it using the provided metadata, and initiate a reset sequence.
> - *
> - * It should be used when Linux is in control setting up the IOMMU hardware
> - * for remote subsystem during secure firmware loading processes. The preparation
> - * step sets up a shmbridge over the firmware memory before TrustZone accesses the
> - * firmware memory region for authentication. The authentication step verifies
> - * the integrity and authenticity of the firmware or configuration using secure
> - * metadata. Finally, the reset step ensures the subsystem starts in a clean and
> - * sane state.
> - *
> - * Return: 0 on success, negative errno on failure.
> - */
> -int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx)
> +static int __qcom_scm_pas_prepare_and_auth_reset(struct device *dev,
> + struct qcom_pas_context *ctx)
> {
> u64 handle;
> int ret;
> @@ -1012,7 +923,7 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx)
> * memory region and then invokes a call to TrustZone to authenticate.
> */
> if (!ctx->use_tzmem)
> - return qcom_scm_pas_auth_and_reset(ctx->pas_id);
> + return __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);
>
> /*
> * When Linux runs @ EL2 Linux must create the shmbridge itself and then
> @@ -1022,20 +933,45 @@ int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx)
> if (ret)
> return ret;
>
> - ret = qcom_scm_pas_auth_and_reset(ctx->pas_id);
> + ret = __qcom_scm_pas_auth_and_reset(dev, ctx->pas_id);
> qcom_tzmem_shm_bridge_delete(handle);
>
> return ret;
> }
> +
> +int qcom_scm_pas_prepare_and_auth_reset(struct qcom_scm_pas_context *ctx)
> +{
> + return __qcom_scm_pas_prepare_and_auth_reset(__scm->dev,
> + (struct qcom_pas_context *)ctx);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_prepare_and_auth_reset);
>
> -/**
> - * qcom_scm_pas_shutdown() - Shut down the remote processor
> - * @pas_id: peripheral authentication service id
> - *
> - * Returns 0 on success.
> - */
> -int qcom_scm_pas_shutdown(u32 pas_id)
> +static int __qcom_scm_pas_set_remote_state(struct device *dev, u32 state,
> + u32 pas_id)
> +{
> + struct qcom_scm_desc desc = {
> + .svc = QCOM_SCM_SVC_BOOT,
> + .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
> + .arginfo = QCOM_SCM_ARGS(2),
> + .args[0] = state,
> + .args[1] = pas_id,
> + .owner = ARM_SMCCC_OWNER_SIP,
> + };
> + struct qcom_scm_res res;
> + int ret;
> +
> + ret = qcom_scm_call(dev, &desc, &res);
> +
> + return ret ? : res.result[0];
> +}
> +
> +int qcom_scm_set_remote_state(u32 state, u32 id)
s/id/pas_id
> +{
> + return __qcom_scm_pas_set_remote_state(__scm->dev, state, id);
> +}
> +EXPORT_SYMBOL_GPL(qcom_scm_set_remote_state);
> +
> +static int __qcom_scm_pas_shutdown(struct device *dev, u32 pas_id)
> {
> int ret;
> struct qcom_scm_desc desc = {
> @@ -1055,7 +991,7 @@ int qcom_scm_pas_shutdown(u32 pas_id)
> if (ret)
> goto disable_clk;
>
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> + ret = qcom_scm_call(dev, &desc, &res);
> qcom_scm_bw_disable();
>
> disable_clk:
> @@ -1063,16 +999,14 @@ int qcom_scm_pas_shutdown(u32 pas_id)
>
> return ret ? : res.result[0];
> }
> +
> +int qcom_scm_pas_shutdown(u32 pas_id)
> +{
> + return __qcom_scm_pas_shutdown(__scm->dev, pas_id);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_shutdown);
>
> -/**
> - * qcom_scm_pas_supported() - Check if the peripheral authentication service is
> - * available for the given peripherial
> - * @pas_id: peripheral authentication service id
> - *
> - * Returns true if PAS is supported for this peripheral, otherwise false.
> - */
> -bool qcom_scm_pas_supported(u32 pas_id)
> +static bool __qcom_scm_pas_supported(struct device *dev, u32 pas_id)
> {
> int ret;
> struct qcom_scm_desc desc = {
> @@ -1084,16 +1018,49 @@ bool qcom_scm_pas_supported(u32 pas_id)
> };
> struct qcom_scm_res res;
>
> - if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
> + if (!__qcom_scm_is_call_available(dev, QCOM_SCM_SVC_PIL,
> QCOM_SCM_PIL_PAS_IS_SUPPORTED))
> return false;
>
> - ret = qcom_scm_call(__scm->dev, &desc, &res);
> + ret = qcom_scm_call(dev, &desc, &res);
>
> return ret ? false : !!res.result[0];
> }
> +
> +bool qcom_scm_pas_supported(u32 pas_id)
> +{
> + return __qcom_scm_pas_supported(__scm->dev, pas_id);
> +}
> EXPORT_SYMBOL_GPL(qcom_scm_pas_supported);
>
> +static struct qcom_pas_ops qcom_pas_ops_scm = {
> + .drv_name = "qcom_scm",
> + .supported = __qcom_scm_pas_supported,
> + .init_image = __qcom_scm_pas_init_image2,
> + .mem_setup = __qcom_scm_pas_mem_setup,
> + .get_rsc_table = __qcom_scm_pas_get_rsc_table2,
> + .auth_and_reset = __qcom_scm_pas_auth_and_reset,
> + .prepare_and_auth_reset = __qcom_scm_pas_prepare_and_auth_reset,
> + .set_remote_state = __qcom_scm_pas_set_remote_state,
> + .shutdown = __qcom_scm_pas_shutdown,
> + .metadata_release = __qcom_scm_pas_metadata_release,
> +};
> +
> +/**
> + * qcom_scm_is_pas_available() - Check if the peripheral authentication service
> + * is available via SCM or not
> + *
> + * Returns true if PAS is available, otherwise false.
> + */
> +static bool qcom_scm_is_pas_available(void)
> +{
> + if (!__qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
> + QCOM_SCM_PIL_PAS_AUTH_AND_RESET))
QCOM_SCM_PIL_PAS_IS_SUPPORTED ?
> + return false;
> +
> + return true;
> +}
> +
> static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
> {
> struct qcom_scm_desc desc = {
> @@ -2836,6 +2803,11 @@ static int qcom_scm_probe(struct platform_device *pdev)
>
> __get_convention();
>
> + if (qcom_scm_is_pas_available()) {
Use qcom_scm_pas_supported() and remove qcom_scm_is_pas_available()..
> + qcom_pas_ops_scm.dev = scm->dev;
> + qcom_pas_ops_register(&qcom_pas_ops_scm);
> + }
> +
> /*
> * If "download mode" is requested, from this point on warmboot
> * will cause the boot stages to enter download mode, unless
> @@ -2875,6 +2847,7 @@ static void qcom_scm_shutdown(struct platform_device *pdev)
> {
> /* Clean shutdown, disable download mode to allow normal restart */
> qcom_scm_set_download_mode(QCOM_DLOAD_NODUMP);
> + qcom_pas_ops_unregister();
> }
>
> static const struct of_device_id qcom_scm_dt_match[] = {
> --
> 2.51.0
>
With above changes,
Reviewed-by: Mukesh Ojha <mukesh.ojha at oss.qualcomm.com>
--
-Mukesh Ojha
More information about the ath12k
mailing list