[PATCH 00/11] wifi: ath12k: Fix endianness handling in QMI

[Alexander Wilhelm]

Fix endianness handling in QMI firmware transfer on big-endian
platforms. Without this fix, the firmware download fails due to
misinterpreted data structures exchanged between the host and the
wireless module.

The issue occurs during early bring-up on big endian systems, where QMI
messages are not correctly parsed by the driver, leading to failed
initialization sequences. Ensure all relevant fields are properly
converted between CPU and little-endian format in request and response
messages, as expected by the firmware. Attached logs showing the failure
before the fix:

    ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
    ath12k_pci 0001:01:00.0: boot pci_mem 0xcd4148e9
    ath12k_pci 0001:01:00.0: pci probe 17cb:1109 17cb:1109
    ath12k_pci 0001:01:00.0: pci tcsr_soc_hw_version major 2 minor 0
    ath12k_pci 0001:01:00.0: request MSI one vector
    ath12k_pci 0001:01:00.0: MSI vectors: 1
    ath12k_pci 0001:01:00.0: msi base data is 0
    ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
    ath12k_pci 0001:01:00.0: boot firmware request ath12k/QCN9274/hw2.0/firmware-2.bin size 15134776
    ath12k_pci 0001:01:00.0: found fw timestamp 1722934582
    ath12k_pci 0001:01:00.0: found m3 image ie (421880 B)
    ath12k_pci 0001:01:00.0: found fw image ie (7229440 B)
    ath12k_pci 0001:01:00.0: found dualmac fw image ie (7483392 B)
    ath12k_pci 0001:01:00.0: found firmware features ie (1 B)
    ath12k_pci 0001:01:00.0: features
    ath12k_pci 0001:01:00.0: using fw api 2
    ath12k_pci 0001:01:00.0: dualmac fw selected for board id: 1005
    ath12k_pci 0001:01:00.0: Assign MSI to user: MHI, num_vectors: 3, user_base_data: 0, base_vector: 0
    ath12k_pci 0001:01:00.0: Number of assigned MSI for MHI is 3, base vector is 0
    ath12k_pci 0001:01:00.0: Assign MSI to user: CE, num_vectors: 1, user_base_data: 0, base_vector: 0
    ath12k_pci 0001:01:00.0: Assign MSI to user: DP, num_vectors: 1, user_base_data: 0, base_vector: 0
    ath12k_pci 0001:01:00.0: irq:18 group:0
    ath12k_pci 0001:01:00.0: irq:18 group:1
    ath12k_pci 0001:01:00.0: irq:18 group:2
    ath12k_pci 0001:01:00.0: irq:18 group:3
    ath12k_pci 0001:01:00.0: irq:18 group:4
    ath12k_pci 0001:01:00.0: irq:18 group:5
    ath12k_pci 0001:01:00.0: irq:18 group:6
    ath12k_pci 0001:01:00.0: irq:18 group:7
    ath12k_pci 0001:01:00.0: pci after request_irq msi_ep_base_data 0
    ath12k_pci 0001:01:00.0: cookie:0x0
    ath12k_pci 0001:01:00.0: WLAON_WARM_SW_ENTRY 0x2
    ath12k_pci 0001:01:00.0: WLAON_WARM_SW_ENTRY 0x2
    ath12k_pci 0001:01:00.0: soc reset cause:0
    ath12k_pci 0001:01:00.0: MHISTATUS 0xff04
    ath12k_pci 0001:01:00.0: pci link_ctl 0x0000 L0s 0 L1 0
    ath12k_pci 0001:01:00.0: pci reg 0x3164 instance 0x11 read val 0x11
    ath12k_pci 0001:01:00.0: setting mhi state: INIT(0)
    ath12k_pci 0001:01:00.0: setting mhi state: POWER_ON(2)
    ath12k_pci 0001:01:00.0: mhi notify status reason UNKNOWN
    ath12k_pci 0001:01:00.0: mhi notify status reason MHI_CB_EE_MISSION_MODE
    ath12k_pci 0001:01:00.0: qmi wifi fw qmi service connected
    ath12k_pci 0001:01:00.0: phy capability resp valid 1 num_phy 2 valid 1 board_id 84934656 valid 1 single_chip_mlo_support 0
    ath12k_pci 0001:01:00.0: intra device MLO is disabled hence skip QMI MLO cap

Alexander Wilhelm (11):
  wifi: ath12k: fix endianness handling in QMI host capability request
  wifi: ath12k: fix endianness handling in QMI phy capability response
  wifi: ath12k: fix endianness handling in QMI firmware indication
  wifi: ath12k: fix endianness handling in QMI firmware memory indication
  wifi: ath12k: fix endianness handling in QMI respond firmware memory
  wifi: ath12k: fix endianness handling in QMI firmware capabilities
  wifi: ath12k: fix endianness handling in QMI bdf download
  wifi: ath12k: fix endianness handling in QMI firmware m3 info
  wifi: ath12k: fix endianness handling in QMI firmware wlan mode
  wifi: ath12k: fix endianness handling in QMI wlan configuration
  wifi: ath12k: fix endianness handling in QMI response

 drivers/net/wireless/ath/ath12k/qmi.c | 149 ++++++++++++++------------
 drivers/net/wireless/ath/ath12k/qmi.h | 106 +++++++++---------
 include/linux/soc/qcom/qmi.h          |   4 +-
 3 files changed, 136 insertions(+), 123 deletions(-)

-- 
2.34.1