[PATCH 2/2] wifi: ath12k: Pass correct values of center freq1 and center freq2 for 320 MHz

Suraj P Kizhakkethil quic_surapk at quicinc.com
Mon Feb 3 21:34:51 PST 2025


From: Sriram R <quic_srirrama at quicinc.com>

Currently, for 320 MHz bandwidth, center frequency1 and
center frequency2 are not passed correctly to the firmware.
Set center frequency1 as the center frequency of the
primary 160 MHz channel segment and center frequency2 as the center
frequency of the 320 MHz channel and pass the values
to the firmware.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Sriram R <quic_srirrama at quicinc.com>
Signed-off-by: Suraj P Kizhakkethil <quic_surapk at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/wmi.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 848a65268194..982bdfc4902f 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1043,7 +1043,15 @@ static void ath12k_wmi_put_wmi_channel(struct ath12k_wmi_channel_params *chan,
 
 	chan->mhz = cpu_to_le32(arg->freq);
 	chan->band_center_freq1 = cpu_to_le32(arg->band_center_freq1);
-	if (arg->mode == MODE_11BE_EHT160) {
+	if (arg->mode == MODE_11BE_EHT320) {
+		if (arg->freq > arg->band_center_freq1)
+			chan->band_center_freq1 = cpu_to_le32(center_freq1 + 80);
+		else
+			chan->band_center_freq1 = cpu_to_le32(center_freq1 - 80);
+
+		chan->band_center_freq2 = cpu_to_le32(arg->band_center_freq1);
+
+	} else if (arg->mode == MODE_11BE_EHT160) {
 		if (arg->freq > arg->band_center_freq1)
 			chan->band_center_freq1 = cpu_to_le32(center_freq1 + 40);
 		else
-- 
2.34.1




More information about the ath12k mailing list