[PULL linux-firmware] ath11k and ath12k firmware 20250424

[G]

Hi Jeff,

I tested the new firmware, but I’m no longer able to connect to Wi-Fi. 
Here's what I’m seeing in the dmesg logs:

[    5.542233] ath12k_pci 0000:c0:00.0: BAR 0 [mem 0xb0600000-0xb07fffff 
64bit]: assigned
[    5.542255] ath12k_pci 0000:c0:00.0: enabling device (0000 -> 0002)
[    5.542755] ath12k_pci 0000:c0:00.0: MSI vectors: 16
[    5.542759] ath12k_pci 0000:c0:00.0: Hardware name: wcn7850 hw2.0
[    6.082937] ath12k_pci 0000:c0:00.0: chip_id 0x2 chip_family 0x4 
board_id 0xff soc_id 0x40170200
[    6.082946] ath12k_pci 0000:c0:00.0: fw_version 0x1105811c 
fw_build_timestamp 2025-03-11 07:08 fw_build_id 
QC_IMAGE_VERSION_STRING=WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
[    6.083130] ath12k_pci 0000:c0:00.0: failed to get ACPI BDF EXT: 0
[    6.363942] ath12k_pci 0000:c0:00.0: ignore reset dev flags 0x200
[   11.240664] ath12k_pci 0000:c0:00.0: failed to receive wmi unified 
ready event: -110
[   11.241174] ath12k_pci 0000:c0:00.0: failed to start core: -110
[   11.242839] ath12k_pci 0000:c0:00.0: qmi failed to send mode request, 
mode: 4, err = -5
[   11.242841] ath12k_pci 0000:c0:00.0: qmi failed to send wlan mode off

Thanks