[PATCH ath-next 03/13] wifi: ath12k: add srng config template for mon status ring

[Kang Yang]

Currently, the hw_srng_config_template does not have a template for mon
status ring.

But srng config template is necessary during ring initialization. So add
a template for mon status ring.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <kang.yang at oss.qualcomm.com>
---
 drivers/net/wireless/ath/ath12k/hal.c | 9 ++++++++-
 drivers/net/wireless/ath/ath12k/hal.h | 1 +
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath12k/hal.c b/drivers/net/wireless/ath/ath12k/hal.c
index 12d0f991a47f..ed268089f9b6 100644
--- a/drivers/net/wireless/ath/ath12k/hal.c
+++ b/drivers/net/wireless/ath/ath12k/hal.c
@@ -154,7 +154,14 @@ static const struct hal_srng_config hw_srng_config_template[] = {
 		.ring_dir = HAL_SRNG_DIR_SRC,
 		.max_size = HAL_RXDMA_RING_MAX_SIZE_BE,
 	},
-	[HAL_RXDMA_MONITOR_STATUS] = { 0, },
+	[HAL_RXDMA_MONITOR_STATUS] = {
+		.start_ring_id = HAL_SRNG_RING_ID_WMAC1_SW2RXDMA1_STATBUF,
+		.max_rings = 1,
+		.entry_size = sizeof(struct hal_wbm_buffer_ring) >> 2,
+		.mac_type = ATH12K_HAL_SRNG_PMAC,
+		.ring_dir = HAL_SRNG_DIR_SRC,
+		.max_size = HAL_RXDMA_RING_MAX_SIZE_BE,
+	},
 	[HAL_RXDMA_MONITOR_DESC] = { 0, },
 	[HAL_RXDMA_DIR_BUF] = {
 		.start_ring_id = HAL_SRNG_RING_ID_RXDMA_DIR_BUF,
diff --git a/drivers/net/wireless/ath/ath12k/hal.h b/drivers/net/wireless/ath/ath12k/hal.h
index 4adef9240409..f627cd01f60c 100644
--- a/drivers/net/wireless/ath/ath12k/hal.h
+++ b/drivers/net/wireless/ath/ath12k/hal.h
@@ -498,6 +498,7 @@ enum hal_srng_ring_id {
 
 	HAL_SRNG_RING_ID_WMAC1_SW2RXMON_BUF0 = HAL_SRNG_RING_ID_PMAC1_ID_START,
 
+	HAL_SRNG_RING_ID_WMAC1_SW2RXDMA1_STATBUF,
 	HAL_SRNG_RING_ID_WMAC1_RXDMA2SW0,
 	HAL_SRNG_RING_ID_WMAC1_RXDMA2SW1,
 	HAL_SRNG_RING_ID_WMAC1_RXMON2SW0 = HAL_SRNG_RING_ID_WMAC1_RXDMA2SW1,
-- 
2.34.1