[PATCH] wifi: ath12k: Skip Rx TID cleanup for self peer

[Jeff Johnson]

On 9/4/2024 9:28 PM, Ramya Gnanasekar wrote:
> During peer create, dp setup for the peer is done where Rx TID is
> updated for all the TIDs. Peer object for self peer will not go through
> dp setup.
> 
> When core halts, dp cleanup is done for all the peers. While cleanup,
> rx_tid::ab is accessed which causes below stack trace for self peer.
> 
> WARNING: CPU: 6 PID: 12297 at drivers/net/wireless/ath/ath12k/dp_rx.c:851
> Call Trace:
> __warn+0x7b/0x1a0
> ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
> report_bug+0x10b/0x200
> handle_bug+0x3f/0x70
> exc_invalid_op+0x13/0x60
> asm_exc_invalid_op+0x16/0x20
> ath12k_dp_rx_frags_cleanup+0xd2/0xe0 [ath12k]
> ath12k_dp_rx_frags_cleanup+0xca/0xe0 [ath12k]
> ath12k_dp_rx_peer_tid_cleanup+0x39/0xa0 [ath12k]
> ath12k_mac_peer_cleanup_all+0x61/0x100 [ath12k]
> ath12k_core_halt+0x3b/0x100 [ath12k]
> ath12k_core_reset+0x494/0x4c0 [ath12k]
> 
> sta object in peer will be updated when remote peer is created. Hence
> use peer::sta to detect the self peer and skip the cleanup.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
> 
> Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
> 

remove this blank line. Kalle can fix this in the pending branch

> Signed-off-by: Ramya Gnanasekar <quic_rgnanase at quicinc.com>

Acked-by: Jeff Johnson <quic_jjohnson at quicinc.com>