[PATCH 6/6] wifi: ath12k: support SMPS configuration for 6 GHz

[Baochen Qiang]

On 3/26/2024 5:23 AM, Pradeep Kumar Chitrapu wrote:
> Parse SMPS configuration from IEs and configure. Without this,
> SMPS is not enabled for 6 GHz band.
> 
> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc at quicinc.com>
> ---
>   drivers/net/wireless/ath/ath12k/mac.c | 25 +++++++++++++++++--------
>   1 file changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
> index b4114dd22bf0..433b8be74997 100644
> --- a/drivers/net/wireless/ath/ath12k/mac.c
> +++ b/drivers/net/wireless/ath/ath12k/mac.c
> @@ -1964,12 +1964,17 @@ static void ath12k_peer_assoc_h_he_6ghz(struct ath12k *ar,
>   }
>   
>   static inline int ath12k_get_smps_from_capa(const struct ieee80211_sta_ht_cap *ht_cap,
> +					    const struct ieee80211_he_6ghz_capa *he_6ghz_capa,
>   					    int *smps)
>   {
> -	if (!ht_cap->ht_supported)
> +	if (!ht_cap->ht_supported && !he_6ghz_capa->capa)
>   		return -EOPNOTSUPP;
>   
> -	*smps = u16_get_bits(ht_cap->cap, IEEE80211_HT_CAP_SM_PS);
> +	if (ht_cap->ht_supported)
> +		*smps = u16_get_bits(ht_cap->cap, IEEE80211_HT_CAP_SM_PS);
> +	else
> +		*smps = le16_get_bits(he_6ghz_capa->capa,
> +				      IEEE80211_HE_6GHZ_CAP_SM_PS);
>   
>   	if (*smps >= ARRAY_SIZE(ath12k_smps_map))
>   		return -EINVAL;
> @@ -1980,10 +1985,11 @@ static inline int ath12k_get_smps_from_capa(const struct ieee80211_sta_ht_cap *h
>   static void ath12k_peer_assoc_h_smps(struct ieee80211_sta *sta,
>   				     struct ath12k_wmi_peer_assoc_arg *arg)
>   {
> +	const struct ieee80211_he_6ghz_capa *he_6ghz_capa = &sta->deflink.he_6ghz_capa;
>   	const struct ieee80211_sta_ht_cap *ht_cap = &sta->deflink.ht_cap;
>   	int smps;
>   
> -	if (ath12k_get_smps_from_capa(ht_cap, &smps))
> +	if (ath12k_get_smps_from_capa(ht_cap, he_6ghz_capa, &smps))
>   		return;
>   
>   	switch (smps) {
> @@ -2457,11 +2463,12 @@ static void ath12k_peer_assoc_prepare(struct ath12k *ar,
>   
>   static int ath12k_setup_peer_smps(struct ath12k *ar, struct ath12k_vif *arvif,
>   				  const u8 *addr,
> -				  const struct ieee80211_sta_ht_cap *ht_cap)
> +				  const struct ieee80211_sta_ht_cap *ht_cap,
> +				  const struct ieee80211_he_6ghz_capa *he_6ghz_capa)
>   {
>   	int smps, ret = 0;
>   
> -	ret = ath12k_get_smps_from_capa(ht_cap, &smps);
> +	ret = ath12k_get_smps_from_capa(ht_cap, he_6ghz_capa, &smps);
>   	if (ret < 0)
>   		return ret;
>   
> @@ -2514,7 +2521,8 @@ static void ath12k_bss_assoc(struct ath12k *ar,
>   	}
>   
>   	ret = ath12k_setup_peer_smps(ar, arvif, bss_conf->bssid,
> -				     &ap_sta->deflink.ht_cap);
> +				     &ap_sta->deflink.ht_cap,
> +				     &ap_sta->deflink.he_6ghz_capa);
>   	if (ret) {
>   		ath12k_warn(ar->ab, "failed to setup peer SMPS for vdev %d: %d\n",
>   			    arvif->vdev_id, ret);
> @@ -3677,7 +3685,8 @@ static int ath12k_station_assoc(struct ath12k *ar,
>   		return 0;
>   
>   	ret = ath12k_setup_peer_smps(ar, arvif, sta->addr,
> -				     &sta->deflink.ht_cap);
> +				     &sta->deflink.ht_cap,
> +				     &sta->deflink.he_6ghz_capa);
>   	if (ret) {
>   		ath12k_warn(ar->ab, "failed to setup peer SMPS for vdev %d: %d\n",
>   			    arvif->vdev_id, ret);
> @@ -8104,7 +8113,7 @@ static int ath12k_mac_hw_register(struct ath12k_hw *ah)
>   	 * for each band for a dual band capable radio. It will be tricky to
>   	 * handle it when the ht capability different for each band.
>   	 */
> -	if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS)
> +	if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz)
WCN7850 supports 6 GHz but it does not support feature 
NL80211_FEATURE_DYNAMIC_SMPS. Enabling this for WCN7850 can lead to 
MU-MIMO test failures.

>   		wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS;
>   
>   	wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID;