QCN9274 - x64 host - board.bin issue

[david Atkins]

Hi,

I see a bug raised on Bugzilla

https://bugzilla.kernel.org/show_bug.cgi?id=217971

I'm seeing the same things and given its only a few days ago assume no change, I have done a fresh pull of the ath12k repo you suggested we use

uname -a
Linux openwrt-wifi-test 6.8.0-wt-ath+ #1 SMP PREEMPT_DYNAMIC Sun Mar 24 08:23:14 GMT 2024 x86_64 x86_64 x86_64 GNU/Linux

[    2.925041] mhi mhi0: Wait for device to enter SBL or Mission mode
[    3.335626] ath12k_pci 0000:03:00.0: memory type 10 not supported
[    3.340770] ath12k_pci 0000:03:00.0: chip_id 0x0 chip_family 0xb board_id 0xc soc_id 0x401a2200
[    3.340777] ath12k_pci 0000:03:00.0: fw_version 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
[    3.356629] ath12k_pci 0000:03:00.0: failed to fetch board data for bus=pci,qmi-chip-id=0,qmi-board-id=12 from ath12k/QCN9274/hw2.0/board-2.bin
[    3.356657] ath12k_pci 0000:03:00.0: failed to fetch board.bin from QCN9274/hw2.0
[    3.356668] ath12k_pci 0000:03:00.0: qmi failed to load bdf:
[    3.356670] ath12k_pci 0000:03:00.0: qmi failed to load board data file:-2

Is there anything I can check or help with this? Different hosts? This was amd I have 4 different setups 2amd 2 intel I can test with if it will help

David


David Atkins