ath12k: driver does not allow the system to switch to suspend/sleep mode

[Owen Mesh.]

Thanks for the info!
I'll wait to hear about the solution.
In the meantime,  will use a proven method - run the "sudo modprobe -r
ath12k" command before leaving home.


пн, 18 мар. 2024 г. в 18:00, Kalle Valo <kvalo at kernel.org>:
>
> Jeff Johnson <quic_jjohnson at quicinc.com> writes:
>
> > On 3/18/2024 5:15 AM, Vladimir Mesh. wrote:
> >> Dear Sirs,
> >>
> >> I have a problem using ath12k driver with wcn7850 adapters.
> >> ath12k driver does not allow the system to switch to suspend/sleep mode.
> >> Please fix it!
> >
> > This is a known issue both for ath11k and ath12k
> > https://bugzilla.kernel.org/show_bug.cgi?id=214649
> >
> > There is already a proposed fix for ath11k that requires changes to other
> > components (MHI & QRTR) that is pending approval from those maintainers:
> > https://lore.kernel.org/ath11k/20240305021320.3367-1-quic_bqiang@quicinc.com/
> >
> > Once that is in place, ath12k can also be addressed.
>
> BTW it would be good to submit corresponding ath12k patches as well.
> That way people could test them and provide feedback.
>
> --
> https://patchwork.kernel.org/project/linux-wireless/list/
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches