[PATCH v3 01/13] wifi: ath12k: indicate NON MBSSID vdev by default during vdev start

[Raj Kumar Bhagat]

From: Sriram R <quic_srirrama at quicinc.com>

When any VDEV is started, MBSSID flags are passed to firmware to
indicate if its a MBSSID/EMA AP vdev. If the interface is not an AP
or if the AP doesn't support MBSSID, the vdev needs to be brought up
as a non MBSSID vdev. Set these flags as a non MBSSID AP by default
which can be updated as and when MBSSID support is added in ath12k.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Sriram R <quic_srirrama at quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 5 +++++
 drivers/net/wireless/ath/ath12k/wmi.c | 1 +
 drivers/net/wireless/ath/ath12k/wmi.h | 8 ++++++--
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index a27480a69b27..672c9d347097 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6153,6 +6153,11 @@ ath12k_mac_vdev_start_restart(struct ath12k_vif *arvif,
 	arg.pref_tx_streams = ar->num_tx_chains;
 	arg.pref_rx_streams = ar->num_rx_chains;
 
+	/* Fill the MBSSID flags to indicate AP is non MBSSID by default
+	 * Corresponding flags would be updated with MBSSID support.
+	 */
+	arg.mbssid_flags = WMI_VDEV_MBSSID_FLAGS_NON_MBSSID_AP;
+
 	if (arvif->vdev_type == WMI_VDEV_TYPE_AP) {
 		arg.ssid = arvif->u.ap.ssid;
 		arg.ssid_len = arvif->u.ap.ssid_len;
diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index 2fa724e5851a..5f1cce16589f 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1024,6 +1024,7 @@ int ath12k_wmi_vdev_start(struct ath12k *ar, struct wmi_vdev_start_req_arg *arg,
 	cmd->regdomain = cpu_to_le32(arg->regdomain);
 	cmd->he_ops = cpu_to_le32(arg->he_ops);
 	cmd->punct_bitmap = cpu_to_le32(arg->punct_bitmap);
+	cmd->mbssid_flags = cpu_to_le32(arg->mbssid_flags);
 
 	if (!restart) {
 		if (arg->ssid) {
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 06e5b9b4049b..d8481c710021 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause-Clear */
 /*
  * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #ifndef ATH12K_WMI_H
@@ -2764,6 +2764,10 @@ struct ath12k_wmi_ssid_params {
 
 #define ATH12K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ)
 
+enum wmi_vdev_mbssid_flags {
+	WMI_VDEV_MBSSID_FLAGS_NON_MBSSID_AP	= BIT(0),
+};
+
 struct wmi_vdev_start_request_cmd {
 	__le32 tlv_header;
 	__le32 vdev_id;
@@ -2782,7 +2786,7 @@ struct wmi_vdev_start_request_cmd {
 	__le32 cac_duration_ms;
 	__le32 regdomain;
 	__le32 min_data_rate;
-	__le32 mbssid_flags;
+	__le32 mbssid_flags; /* uses enum wmi_vdev_mbssid_flags */
 	__le32 mbssid_tx_vdev_id;
 	__le32 eht_ops;
 	__le32 punct_bitmap;
-- 
2.34.1