[PATCH V8 0/9] wifi: ath12k: add MU-MIMO and 160 MHz bandwidth support

[Pradeep Kumar Chitrapu]

On 9/30/2024 2:21 PM, Jeff Johnson wrote:
> On 9/18/2024 2:20 PM, Pradeep Kumar Chitrapu wrote:
>> Add support for
>> 1. enabling MU-MIMO in HE and EHT modes from hardware
>> 2. setting fixed HE rate/GI/LTF
>> 3. 160 MHz bandwidth in HE mode
>> 4. extended NSS bandwidth support
>>
>> Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
>> Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
>>
>> changes in v8:
>>   - rebase and resolve KASAN warnings reported by Jeff in v7, in patch 6/9.
>>
>> changes in v7:
>>   - rebase and remove patch 01/10 which was merged already.
>>
>> changes in v6:
>>   - Change comment in patch 01/10 to represent only AP mode
>>     implementation.
>>
>> changes in v5:
>>   - Fix column length to 80 in patch 01/10
>>   - Fix advertises spelling in patch 09/10
>>   - Fix choosing spelling in patch 10/10
>>
>> changes in v4:
>>   - Fix ath12k-check warnings in patch 2/10 and 7/10
>>   - remove "hostapd" reference in patches 2/10 and 3/10
>>   - remove redundant prerequisite-patch-id's in cover letter
>>
>> changes in v3:
>>   - address review comments for fixing ath12k-check issues.
>>
>> changes in v2:
>>   - Amend mac80211 patch description as the patch is not specific
>>     to AP mode.
>>   - Amend EHT MU-MIMO patch description to specify future support
>>     for STA mode.
>>
>> Pradeep Kumar Chitrapu (9):
>>    wifi: ath12k: push HE MU-MIMO params to hardware
>>    wifi: ath12k: push EHT MU-MIMO params to hardware
>>    wifi: ath12k: move HE MCS mapper to a separate function
>>    wifi: ath12k: generate rx and tx mcs maps for supported HE mcs
>>    wifi: ath12k: fix TX and RX MCS rate configurations in HE mode
>>    wifi: ath12k: add support for setting fixed HE rate/GI/LTF
>>    wifi: ath12k: clean up 80P80 support
>>    wifi: ath12k: add support for 160 MHz bandwidth
>>    wifi: ath12k: add extended NSS bandwidth support for 160 MHz
>>
>>   drivers/net/wireless/ath/ath12k/core.h |    2 +
>>   drivers/net/wireless/ath/ath12k/mac.c  | 1052 ++++++++++++++++++++----
>>   drivers/net/wireless/ath/ath12k/mac.h  |   17 +
>>   drivers/net/wireless/ath/ath12k/wmi.c  |   24 +-
>>   drivers/net/wireless/ath/ath12k/wmi.h  |   98 ++-
>>   5 files changed, 985 insertions(+), 208 deletions(-)
>>
>>
>> base-commit: 92de67902177c2ea65000a87a6b24fed17d48a18
> 
> Although this series applies cleanly to ath/main, it does not apply cleanly to
> ath/ath12k-mlo. So dropping this until ath12k-mlo is mainlined so that your
> series can be rebased on that.
> 
Thanks Jeff..with mlo changes merged on ath.git, I will now rebase and 
post next revision.

Thanks
Pradeep