[PATCH] wifi: ath12k: fix packets are sent in native wifi mode while we set raw mode

[Aaradhana Sahu]

Currently, if we set raw mode as encap type, packets are sent
in native wifi mode which is default mode. This is caused by
no check being present for raw mode in ath12k_dp_tx_get_encap_type
function, so it's always going in native wifi mode.

Fix, this issue by adding check condition for raw mode.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aaradhana Sahu <quic_aarasahu at quicinc.com>
---
 drivers/net/wireless/ath/ath12k/dp_tx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/dp_tx.c b/drivers/net/wireless/ath/ath12k/dp_tx.c
index fd8d850f9818..d3c7c76d6b75 100644
--- a/drivers/net/wireless/ath/ath12k/dp_tx.c
+++ b/drivers/net/wireless/ath/ath12k/dp_tx.c
@@ -13,6 +13,10 @@ static enum hal_tcl_encap_type
 ath12k_dp_tx_get_encap_type(struct ath12k_vif *arvif, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath12k_base *ab = arvif->ar->ab;
+
+	if (test_bit(ATH12K_FLAG_RAW_MODE, &ab->dev_flags))
+		return HAL_TCL_ENCAP_TYPE_RAW;
 
 	if (tx_info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)
 		return HAL_TCL_ENCAP_TYPE_ETHERNET;

base-commit: 3df3715e556027e94246b2cb30986563362a65f4
-- 
2.17.1