[PATCH v5 06/11] wifi: ath12k: prepare EHT peer assoc parameters

[Wen Gong]

On 7/26/2023 6:40 AM, Aloka Dixit wrote:
[...]
> +
> +static void ath12k_peer_assoc_h_eht(struct ath12k *ar,
> +				    struct ieee80211_vif *vif,
> +				    struct ieee80211_sta *sta,
> +				    struct ath12k_wmi_peer_assoc_arg *arg)
> +{
> +	const struct ieee80211_sta_eht_cap *eht_cap = &sta->deflink.eht_cap;
> +	const struct ieee80211_sta_he_cap *he_cap = &sta->deflink.he_cap;
[...]
> +	default:
> +		if ((he_cap->he_cap_elem.phy_cap_info[0] &
> +		     (IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
> +		      IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)) == 0) {
> +			const struct ieee80211_eht_mcs_nss_supp_20mhz_only *bw_20 =
> +					&eht_cap->eht_mcs_nss_supp.only_20mhz;
> +
This is the IEs of my AP below, then it will still entered into this 
branch for my ath12k station mode.
sta->deflink.eht_cap and sta->deflink.he_cap is copied from peer remote, 
for ath12k station mode, peer
remote is the AP. The field only_20mhz is only valid when the IEs is 
from a station which only support
20 MHz.

I think the flag from_ap should be added here as well as function 
ieee80211_eht_mcs_nss_size().

Please correct me if wrong.

Ext Tag: HE Capabilities (IEEE Std 802.11ax/D3.0)
     Tag Number: Element ID Extension (255)
     Ext Tag length: 29
     Ext Tag Number: HE Capabilities (IEEE Std 802.11ax/D3.0) (35)
     HE MAC Capabilities Information: 0x10401a08010d
     HE Phy Capabilities Information
         .... ...0 = Reserved: 0x0
         0000 000. = Channel Width Set: 0x00
             .... ..0. = 40MHz in 2.4GHz band: Not supported
             .... .0.. = 40 & 80MHz in the 5GHz or 6GHz band: Not supported
             .... 0... = 160MHz in the 5GHz or 6GHz band: Not supported
             ...0 .... = 160/80+80MHz in the 5GHz or 6GHz band: Not 
supported
             ..0. .... = 242 tone RUs in the 2.4GHz band: Not supported
             .0.. .... = 242 tone RUs in the 5GHz or 6GHz band: Not 
supported
             0... .... = Reserved: 0x0
         Bits 8 to 23: 0x4063
         Bits 24 to 39: 0x1f88
         Bits 40 to 55: 0x8141
         Bits 56 to 71: 0x111c
         Bits 72 to 87: 0x0008
     Supported HE-MCS and NSS Set
     PPE Thresholds

Ext Tag: EHT Capabilities (IEEE Std 802.11be/D2.0)
     Tag Number: Element ID Extension (255)
     Ext Tag length: 15
     Ext Tag Number: EHT Capabilities (IEEE Std 802.11be/D2.0) (108)
     EHT MAC Capabilities Information: 0x0000
     EHT PHY Capabilities Information
     Supported EHT-MCS and NSS Set
         EHT-MCS Map (BW <= 80MHz): 0x222222
             .... .... .... .... .... 0010 = Rx Max Nss That Supports 
EHT-MCS 0-9: 2
             .... .... .... .... 0010 .... = Tx Max Nss That Supports 
EHT-MCS 0-9: 2
             .... .... .... 0010 .... .... = Rx Max Nss That Supports 
EHT-MCS 10-11: 2
             .... .... 0010 .... .... .... = Tx Max Nss That Supports 
EHT-MCS 10-11: 2
             .... 0010 .... .... .... .... = Rx Max Nss That Supports 
EHT-MCS 12-13: 2
             0010 .... .... .... .... .... = Tx Max Nss That Supports 
EHT-MCS 12-13: 2
     EHT PPE Thresholds: <MISSING>

> +			ath12k_mac_set_eht_mcs(bw_20->rx_tx_mcs7_max_nss,
> +					       bw_20->rx_tx_mcs9_max_nss,
> +					       bw_20->rx_tx_mcs11_max_nss,
> +					       bw_20->rx_tx_mcs13_max_nss,
> +					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
> +					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
> +		} else {
> +			bw = &eht_cap->eht_mcs_nss_supp.bw._80;
> +			ath12k_mac_set_eht_mcs(bw->rx_tx_mcs9_max_nss,
> +					       bw->rx_tx_mcs9_max_nss,
> +					       bw->rx_tx_mcs11_max_nss,
> +					       bw->rx_tx_mcs13_max_nss,
> +					       &rx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80],
> +					       &tx_mcs[WMI_EHTCAP_TXRX_MCS_NSS_IDX_80]);
> +		}
> +
> +		arg->peer_eht_mcs_count++;
> +		break;
> +	}
> +}
> +
[...]