[PATCH v5 08/11] wifi: ath12k: peer assoc for 320 MHz

[Aloka Dixit]

Add required peer association definitions and processing if the
bandwidth is 320 MHz.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad at quicinc.com>
Signed-off-by: Pradeep Kumar Chitrapu<quic_pradeepc at quicinc.com>
---
v5: No change from v4.
v4: No change from v3.
v3: No change from v2.
v2: No change from v1.

 drivers/net/wireless/ath/ath12k/wmi.c | 2 ++
 drivers/net/wireless/ath/ath12k/wmi.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/net/wireless/ath/ath12k/wmi.c b/drivers/net/wireless/ath/ath12k/wmi.c
index db1ff376319e..b0722050206d 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.c
+++ b/drivers/net/wireless/ath/ath12k/wmi.c
@@ -1816,6 +1816,8 @@ static void ath12k_wmi_copy_peer_flags(struct wmi_peer_assoc_complete_cmd *cmd,
 			cmd->peer_flags |= cpu_to_le32(WMI_PEER_80MHZ);
 		if (arg->bw_160)
 			cmd->peer_flags |= cpu_to_le32(WMI_PEER_160MHZ);
+		if (arg->bw_320)
+			cmd->peer_flags |= cpu_to_le32(WMI_PEER_EXT_320MHZ);
 
 		/* Typically if STBC is enabled for VHT it should be enabled
 		 * for HT as well
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 780d589268b0..764ca4947281 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -1169,6 +1169,7 @@ enum wmi_tlv_peer_flags {
 
 enum wmi_tlv_peer_flags_ext {
 	WMI_PEER_EXT_EHT = BIT(0),
+	WMI_PEER_EXT_320MHZ = BIT(1),
 };
 
 /** Enum list of TLV Tags for each parameter structure type. */
@@ -3553,6 +3554,7 @@ struct ath12k_wmi_peer_assoc_arg {
 	bool bw_40;
 	bool bw_80;
 	bool bw_160;
+	bool bw_320;
 	bool stbc_flag;
 	bool ldpc_flag;
 	bool static_mimops_flag;
-- 
2.39.0