[PATCH] wifi: ath12k: increase vdev setup timeout
Ramya Gnanasekar
quic_rgnanase at quicinc.com
Fri Apr 28 02:10:41 PDT 2023
From: Aishwarya R <quic_aisr at quicinc.com>
When vdev start/stop happens, response from firmware is received with delay
and hence there is a timeout before VDEV can be up/down.
Also, with maximum peers connected and when vdev stop occurs, firmware
will take time to clean up all the peers and vap queues.
In such cases as well, vdev start/stop response is sent by firmware with delay.
Increase the vdev setup timeout as recommended by firmware team.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0-02903-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aishwarya R <quic_aisr at quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase at quicinc.com>
---
drivers/net/wireless/ath/ath12k/mac.c | 2 ++
drivers/net/wireless/ath/ath12k/wmi.h | 2 +-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 8c401145a221..d720d95eba96 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -771,6 +771,8 @@ static int ath12k_mac_vdev_setup_sync(struct ath12k *ar)
if (test_bit(ATH12K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags))
return -ESHUTDOWN;
+ ath12k_dbg(ar->ab, ATH12K_DBG_MAC, "ath12k vdev setup timeout %d\n",
+ ATH12K_VDEV_SETUP_TIMEOUT_HZ);
if (!wait_for_completion_timeout(&ar->vdev_setup_done,
ATH12K_VDEV_SETUP_TIMEOUT_HZ))
return -ETIMEDOUT;
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index ddc3b72755c4..a8b972493fbb 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -2682,7 +2682,7 @@ struct ath12k_wmi_ssid_params {
u8 ssid[ATH12K_WMI_SSID_LEN];
} __packed;
-#define ATH12K_VDEV_SETUP_TIMEOUT_HZ (1 * HZ)
+#define ATH12K_VDEV_SETUP_TIMEOUT_HZ (5 * HZ)
struct wmi_vdev_start_request_cmd {
__le32 tlv_header;
--
2.17.1
More information about the ath12k
mailing list