[PATCH 24/50] wifi: ath12k: add hal_tx.c

[Jeff Johnson]

On 8/12/2022 9:09 AM, Kalle Valo wrote:
> From: Kalle Valo <quic_kvalo at quicinc.com>
> 
> (Patches split into one patch per file for easier review, but the final
> commit will be one big patch. See the cover letter for more info.)
> 
> Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
> ---
>   drivers/net/wireless/ath/ath12k/hal_tx.c | 137 +++++++++++++++++++++++++++++++
>   1 file changed, 137 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath12k/hal_tx.c b/drivers/net/wireless/ath/ath12k/hal_tx.c
> new file mode 100644
> index 000000000000..ac6f83ec06c2
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath12k/hal_tx.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: BSD-3-Clause-Clear
> +/*
> + * Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
> + * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include "hal_desc.h"
> +#include "hal.h"
> +#include "hal_tx.h"
> +#include "hif.h"
> +
> +#define DSCP_TID_MAP_TBL_ENTRY_SIZE 64
> +
> +/* dscp_tid_map - Default DSCP-TID mapping
> + *
> + * DSCP        TID
> + * 000000      0

this comment confused me more than it helped me
IMO this would be a much better comment like:
  * 000xxx      0

> + * 001000      1
> + * 010000      2
> + * 011000      3
> + * 100000      4
> + * 101000      5
> + * 110000      6
> + * 111000      7
> + */
> +static const u8 dscp_tid_map[DSCP_TID_MAP_TBL_ENTRY_SIZE] = {
> +	0, 0, 0, 0, 0, 0, 0, 0,
> +	1, 1, 1, 1, 1, 1, 1, 1,
> +	2, 2, 2, 2, 2, 2, 2, 2,
> +	3, 3, 3, 3, 3, 3, 3, 3,
> +	4, 4, 4, 4, 4, 4, 4, 4,
> +	5, 5, 5, 5, 5, 5, 5, 5,
> +	6, 6, 6, 6, 6, 6, 6, 6,
> +	7, 7, 7, 7, 7, 7, 7, 7,
> +};

is a lookup table "better" than a simple:
static inline u8 dscp2tid(u8 dscp)
{
	return dscp >> 3;
}

> +
> +void ath12k_hal_tx_cmd_desc_setup(struct ath12k_base *ab,
> +				  struct hal_tcl_data_cmd *tcl_cmd,
> +				  struct hal_tx_info *ti)
> +{
> +	tcl_cmd->buf_addr_info.info0 =
> +		le32_encode_bits(ti->paddr, BUFFER_ADDR_INFO0_ADDR);
> +	tcl_cmd->buf_addr_info.info1 =
> +		le32_encode_bits(((uint64_t)ti->paddr >> HAL_ADDR_MSB_REG_SHIFT),
> +				 BUFFER_ADDR_INFO1_ADDR);
> +	tcl_cmd->buf_addr_info.info1 |=
> +		le32_encode_bits((ti->rbm_id), BUFFER_ADDR_INFO1_RET_BUF_MGR) |
> +		le32_encode_bits(ti->desc_id, BUFFER_ADDR_INFO1_SW_COOKIE);
> +
> +	tcl_cmd->info0 =
> +		le32_encode_bits(ti->type, HAL_TCL_DATA_CMD_INFO0_DESC_TYPE) |
> +		le32_encode_bits(ti->bank_id, HAL_TCL_DATA_CMD_INFO0_BANK_ID);
> +
> +	tcl_cmd->info1 =
> +		le32_encode_bits(ti->meta_data_flags,
> +				 HAL_TCL_DATA_CMD_INFO1_CMD_NUM);
> +
> +	tcl_cmd->info2 = cpu_to_le32(ti->flags0) |
> +		le32_encode_bits(ti->data_len, HAL_TCL_DATA_CMD_INFO2_DATA_LEN) |
> +		le32_encode_bits(ti->pkt_offset, HAL_TCL_DATA_CMD_INFO2_PKT_OFFSET);
> +
> +	tcl_cmd->info3 = cpu_to_le32(ti->flags1) |
> +		le32_encode_bits(ti->tid, HAL_TCL_DATA_CMD_INFO3_TID) |
> +		le32_encode_bits(ti->lmac_id, HAL_TCL_DATA_CMD_INFO3_PMAC_ID) |
> +		le32_encode_bits(ti->vdev_id, HAL_TCL_DATA_CMD_INFO3_VDEV_ID);
> +
> +	tcl_cmd->info4 = le32_encode_bits(ti->bss_ast_idx,
> +					  HAL_TCL_DATA_CMD_INFO4_SEARCH_INDEX) |
> +			 le32_encode_bits(ti->bss_ast_hash,
> +					  HAL_TCL_DATA_CMD_INFO4_CACHE_SET_NUM);
> +	tcl_cmd->info5 = 0;
> +}
> +
> +void ath12k_hal_tx_set_dscp_tid_map(struct ath12k_base *ab, int id)
> +{
> +	u32 ctrl_reg_val;
> +	u32 addr;
> +	u8 hw_map_val[HAL_DSCP_TID_TBL_SIZE];
> +	int i;
> +	u32 value;
> +	int cnt = 0;
> +
> +	ctrl_reg_val = ath12k_hif_read32(ab, HAL_SEQ_WCSS_UMAC_TCL_REG +
> +					 HAL_TCL1_RING_CMN_CTRL_REG);
> +	/* Enable read/write access */
> +	ctrl_reg_val |= HAL_TCL1_RING_CMN_CTRL_DSCP_TID_MAP_PROG_EN;
> +	ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_TCL_REG +
> +			   HAL_TCL1_RING_CMN_CTRL_REG, ctrl_reg_val);
> +
> +	addr = HAL_SEQ_WCSS_UMAC_TCL_REG + HAL_TCL1_RING_DSCP_TID_MAP +
> +	       (4 * id * (HAL_DSCP_TID_TBL_SIZE / 4));
> +
> +	/* Configure each DSCP-TID mapping in three bits there by configure
> +	 * three bytes in an iteration.
> +	 */
> +	for (i = 0; i < DSCP_TID_MAP_TBL_ENTRY_SIZE; i += 8) {
> +		value = u32_encode_bits(dscp_tid_map[i],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP0) |
> +			u32_encode_bits(dscp_tid_map[i + 1],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP1) |
> +			u32_encode_bits(dscp_tid_map[i + 2],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP2) |
> +			u32_encode_bits(dscp_tid_map[i + 3],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP3) |
> +			u32_encode_bits(dscp_tid_map[i + 4],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP4) |
> +			u32_encode_bits(dscp_tid_map[i + 5],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP5) |
> +			u32_encode_bits(dscp_tid_map[i + 6],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP6) |
> +			u32_encode_bits(dscp_tid_map[i + 7],
> +					HAL_TCL1_RING_FIELD_DSCP_TID_MAP7);
> +
> +		memcpy(&hw_map_val[cnt], &value, 3);
> +		cnt += 3;
> +	}

since everything used to create hw_map_val[] is invariant, why not just 
have a static const array of the final values and get rid of the loop above?

> +
> +	for (i = 0; i < HAL_DSCP_TID_TBL_SIZE; i += 4) {
> +		ath12k_hif_write32(ab, addr, *(u32 *)&hw_map_val[i]);
> +		addr += 4;
> +	}
> +
> +	/* Disable read/write access */
> +	ctrl_reg_val = ath12k_hif_read32(ab, HAL_SEQ_WCSS_UMAC_TCL_REG +
> +					 HAL_TCL1_RING_CMN_CTRL_REG);
> +	ctrl_reg_val &= ~HAL_TCL1_RING_CMN_CTRL_DSCP_TID_MAP_PROG_EN;
> +	ath12k_hif_write32(ab, HAL_SEQ_WCSS_UMAC_TCL_REG +
> +			   HAL_TCL1_RING_CMN_CTRL_REG,
> +			   ctrl_reg_val);
> +}
> +
> +void ath12k_hal_tx_configure_bank_register(struct ath12k_base *ab, u32 bank_config,
> +					   u8 bank_id)
> +{
> +	ath12k_hif_write32(ab, HAL_TCL_SW_CONFIG_BANK_ADDR + 4 * bank_id,
> +			   bank_config);
> +}
>