[PATCH 11/50] wifi: ath12k: add dp.c
Jeff Johnson
quic_jjohnson at quicinc.com
Tue Aug 16 08:17:19 PDT 2022
On 8/12/2022 9:09 AM, Kalle Valo wrote:
> From: Kalle Valo <quic_kvalo at quicinc.com>
>
> (Patches split into one patch per file for easier review, but the final
> commit will be one big patch. See the cover letter for more info.)
>
> Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
> ---
> drivers/net/wireless/ath/ath12k/dp.c | 1560 ++++++++++++++++++++++++++++++++++
> 1 file changed, 1560 insertions(+)
>
> diff --git a/drivers/net/wireless/ath/ath12k/dp.c b/drivers/net/wireless/ath/ath12k/dp.c
> new file mode 100644
> index 000000000000..351bb24e08a0
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath12k/dp.c
snip
> +int ath12k_dp_peer_setup(struct ath12k *ar, int vdev_id, const u8 *addr)
> +{
> + struct ath12k_base *ab = ar->ab;
> + struct ath12k_peer *peer;
> + u32 reo_dest;
> + int ret = 0, tid;
> +
> + /* NOTE: reo_dest ring id starts from 1 unlike mac_id which starts from 0 */
> + reo_dest = ar->dp.mac_id + 1;
> + ret = ath12k_wmi_set_peer_param(ar, addr, vdev_id,
> + WMI_PEER_SET_DEFAULT_ROUTING,
> + DP_RX_HASH_ENABLE | (reo_dest << 1));
> +
> + if (ret) {
> + ath12k_warn(ab, "failed to set default routing %d peer :%pM vdev_id :%d\n",
> + ret, addr, vdev_id);
> + return ret;
> + }
> +
> + for (tid = 0; tid <= IEEE80211_NUM_TIDS; tid++) {
> + ret = ath12k_dp_rx_peer_tid_setup(ar, addr, vdev_id, tid, 1, 0,
> + HAL_PN_TYPE_NONE);
> + if (ret) {
> + ath12k_warn(ab, "failed to setup rxd tid queue for tid %d: %d\n",
> + tid, ret);
> + goto peer_clean;
> + }
> + }
> +
> + ret = ath12k_dp_rx_peer_frag_setup(ar, addr, vdev_id);
> + if (ret) {
> + ath12k_warn(ab, "failed to setup rx defrag context\n");
> + return ret;
why does this failure simply return whereas just previously upon the
failure of ath12k_dp_rx_peer_tid_setup() we goto peer_clean. don't we
need to do the peer_clean logic here as well to undo the
ath12k_dp_rx_peer_tid_setup() calls?
> + }
> +
> + /* TODO: Setup other peer specific resource used in data path */
> +
> + return 0;
> +
> +peer_clean:
> + spin_lock_bh(&ab->base_lock);
> +
> + peer = ath12k_peer_find(ab, vdev_id, addr);
> + if (!peer) {
> + ath12k_warn(ab, "failed to find the peer to del rx tid\n");
> + spin_unlock_bh(&ab->base_lock);
> + return -ENOENT;
> + }
> +
> + for (; tid >= 0; tid--)
> + ath12k_dp_rx_peer_tid_delete(ar, peer, tid);
> +
> + spin_unlock_bh(&ab->base_lock);
> +
> + return ret;
> +}
snip
> +static
> +void ath12k_dp_tx_get_vdev_bank_config(struct ath12k_base *ab, struct ath12k_vif *arvif,
> + u32 *bank_config)
rather than be a void function with a writable param, why not return the
bank_config as the function return value?
> +{
> + enum hal_encrypt_type encrypt_type = 0;
I would expect an enum initializer to be one of the enumerators.
0 is HAL_ENCRYPT_TYPE_WEP_40 -- is that really the correct value?
> +
> + /* Only valid for raw frames with HW crypto enabled.
> + * With SW crypto, mac80211 sets key per packet
> + */
> + if (arvif->tx_encap_type == HAL_TCL_ENCAP_TYPE_RAW &&
> + test_bit(ATH12K_FLAG_HW_CRYPTO_DISABLED, &ab->dev_flags))
> + encrypt_type = ath12k_dp_tx_get_encrypt_type(arvif->key_cipher);
> +
> + *bank_config |= u32_encode_bits(arvif->tx_encap_type,
> + HAL_TX_BANK_CONFIG_ENCAP_TYPE) |
> + u32_encode_bits(encrypt_type,
> + HAL_TX_BANK_CONFIG_ENCRYPT_TYPE);
> + *bank_config |= u32_encode_bits(0, HAL_TX_BANK_CONFIG_SRC_BUFFER_SWAP) |
> + u32_encode_bits(0, HAL_TX_BANK_CONFIG_LINK_META_SWAP) |
> + u32_encode_bits(0, HAL_TX_BANK_CONFIG_EPD);
> +
> + /* only valid if idx_lookup_override is not set in tcl_data_cmd */
> + *bank_config |= u32_encode_bits(0, HAL_TX_BANK_CONFIG_INDEX_LOOKUP_EN);
> +
> + *bank_config |= u32_encode_bits(arvif->hal_addr_search_flags & HAL_TX_ADDRX_EN,
> + HAL_TX_BANK_CONFIG_ADDRX_EN) |
> + u32_encode_bits(!!(arvif->hal_addr_search_flags &
> + HAL_TX_ADDRY_EN),
> + HAL_TX_BANK_CONFIG_ADDRY_EN);
> +
> + *bank_config |= u32_encode_bits(ieee80211_vif_is_mesh(arvif->vif) ? 3 : 0,
> + HAL_TX_BANK_CONFIG_MESH_EN) |
> + u32_encode_bits(arvif->vdev_id_check_en,
> + HAL_TX_BANK_CONFIG_VDEV_ID_CHECK_EN);
> +
> + *bank_config |= u32_encode_bits(0, HAL_TX_BANK_CONFIG_DSCP_TIP_MAP_ID);
> +}
> +
> +static int ath12k_dp_tx_get_bank_profile(struct ath12k_base *ab, struct ath12k_vif *arvif,
> + struct ath12k_dp *dp)
> +{
> + int bank_id = DP_INVALID_BANK_ID;
> + int i;
> + u32 bank_config = 0;
this initializer would be unnecessary if
ath12k_dp_tx_get_vdev_bank_config() returns the config as the function
return value instead of doing so by reference via a function param
> + bool configure_register = false;
> +
> + /* convert vdev params into hal_tx_bank_config */
> + ath12k_dp_tx_get_vdev_bank_config(ab, arvif, &bank_config);
> +
> + spin_lock_bh(&dp->tx_bank_lock);
> + /* TODO: implement using idr kernel framework*/
> + for (i = 0; i < dp->num_bank_profiles; i++) {
> + if (dp->bank_profiles[i].is_configured &&
> + (dp->bank_profiles[i].bank_config ^ bank_config) == 0) {
> + bank_id = i;
> + goto inc_ref_and_return;
> + }
> + if (!dp->bank_profiles[i].is_configured ||
> + !dp->bank_profiles[i].num_users) {
> + bank_id = i;
> + goto configure_and_return;
> + }
> + }
> +
> + if (bank_id == DP_INVALID_BANK_ID) {
> + spin_unlock_bh(&dp->tx_bank_lock);
> + ath12k_err(ab, "unable to find TX bank!");
> + return bank_id;
> + }
> +
> +configure_and_return:
> + dp->bank_profiles[bank_id].is_configured = true;
> + dp->bank_profiles[bank_id].bank_config = bank_config;
> + configure_register = true;
> +inc_ref_and_return:
> + dp->bank_profiles[bank_id].num_users++;
> + spin_unlock_bh(&dp->tx_bank_lock);
> +
> + if (configure_register)
> + ath12k_hal_tx_configure_bank_register(ab, bank_config, bank_id);
> +
> + ath12k_dbg(ab, ATH12K_DBG_DP_HTT, "dp_htt tcl bank_id %d input 0x%x match 0x%x num_users %u",
> + bank_id, bank_config, dp->bank_profiles[bank_id].bank_config,
> + dp->bank_profiles[bank_id].num_users);
> +
> + return bank_id;
> +}
> +
> +void ath12k_dp_tx_put_bank_profile(struct ath12k_dp *dp, u8 bank_id)
> +{
> + spin_lock_bh(&dp->tx_bank_lock);
> + dp->bank_profiles[bank_id].num_users--;
> + spin_unlock_bh(&dp->tx_bank_lock);
> +}
> +
> +static void ath12k_dp_deinit_bank_profiles(struct ath12k_base *ab)
> +{
> + struct ath12k_dp *dp = &ab->dp;
> +
> + kfree(dp->bank_profiles);
suggest setting dp->bank_profiles = NULL to avoid dangling pointer to
freed memory
> +}
> +
snip
> +static void ath12k_dp_srng_common_cleanup(struct ath12k_base *ab)
> +{
> + struct ath12k_dp *dp = &ab->dp;
> + int i;
> +
> + ath12k_dp_srng_cleanup(ab, &dp->wbm_desc_rel_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->tcl_cmd_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->tcl_status_ring);
> + for (i = 0; i < ab->hw_params->max_tx_ring; i++) {
> + ath12k_dp_srng_cleanup(ab, &dp->tx_ring[i].tcl_data_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->tx_ring[i].tcl_comp_ring);
> + }
> + ath12k_dp_srng_cleanup(ab, &dp->reo_reinject_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->rx_rel_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->reo_except_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->reo_cmd_ring);
> + ath12k_dp_srng_cleanup(ab, &dp->reo_status_ring);
i'm used to seeing deinit code do things in reverse order of init code,
but the above is doing things in the same order. yes it probably doesn't
matter in this case, but if you consistently deinit in reverse order of
init then you'll get it right in the cases where it does matter
> +}
> +
snip
> +int ath12k_dp_service_srng(struct ath12k_base *ab,
> + struct ath12k_ext_irq_grp *irq_grp,
> + int budget)
> +{
> + struct napi_struct *napi = &irq_grp->napi;
> + int grp_id = irq_grp->grp_id;
> + int work_done = 0;
> + int i = 0, j;
> + int tot_work_done = 0;
> + bool flag;
not a fan of a bool named flag.
better would be a name that tells us what it means when the flag is set.
I see this issue throughout the dp_mon functions:
ath12k_dp_mon_process_ring(...bool flag)
ath12k_dp_mon_srng_process(...bool flag, ...)
looking further I see:
#define ATH12K_DP_TX_MONITOR_MODE 0
#define ATH12K_DP_RX_MONITOR_MODE 1
(note 0 and 1 are not bool enumerators)
and logic like:
if (flag == ATH12K_DP_RX_MONITOR_MODE) {
so IMO based upon this kind of logic it would make more sense to have
either:
an enum ath12k_dp_monitor_mode and use that everywhere, or
rename bool flag to bool rx_mode and use that everywhere
> +
> + while (i < ab->hw_params->max_tx_ring) {
> + if (ab->hw_params->ring_mask->tx[grp_id] &
> + BIT(ab->hw_params->hal_ops->tcl_to_wbm_rbm_map[i].wbm_ring_num))
> + ath12k_dp_tx_completion_handler(ab, i);
> + i++;
> + }
> +
> + if (ab->hw_params->ring_mask->rx_err[grp_id]) {
> + work_done = ath12k_dp_rx_process_err(ab, napi, budget);
> + budget -= work_done;
> + tot_work_done += work_done;
> + if (budget <= 0)
> + goto done;
> + }
> +
> + if (ab->hw_params->ring_mask->rx_wbm_rel[grp_id]) {
> + work_done = ath12k_dp_rx_process_wbm_err(ab,
> + napi,
> + budget);
> + budget -= work_done;
> + tot_work_done += work_done;
> +
> + if (budget <= 0)
> + goto done;
> + }
> +
> + if (ab->hw_params->ring_mask->rx[grp_id]) {
> + i = fls(ab->hw_params->ring_mask->rx[grp_id]) - 1;
> + work_done = ath12k_dp_rx_process(ab, i, napi,
> + budget);
> + budget -= work_done;
> + tot_work_done += work_done;
> + if (budget <= 0)
> + goto done;
> + }
> +
> + if (ab->hw_params->ring_mask->rx_mon_dest[grp_id]) {
> + for (i = 0; i < ab->num_radios; i++) {
> + for (j = 0; j < ab->hw_params->num_rxmda_per_pdev; j++) {
> + int id = i * ab->hw_params->num_rxmda_per_pdev + j;
> + > + flag = ATH12K_DP_RX_MONITOR_MODE;
this is invariant so it should be assigned outside the loops. yes, the
compiler will probably do that for you, but why not do it yourself?
> +
> + if (ab->hw_params->ring_mask->rx_mon_dest[grp_id] &
isn't ab->hw_params->ring_mask->rx_mon_dest[grp_id] also invariant?
> + BIT(id)) {
indentation the same as the code that follows makes it difficult to
distinguish the condition from the conditional code
> + work_done =
> + ath12k_dp_mon_process_ring(ab, id, napi, budget,
descendant is not indented from the first line, making it difficult to
see the code structure
> + flag);
> + budget -= work_done;
> + tot_work_done += work_done;
> +
> + if (budget <= 0)
> + goto done;
> + }
> + }
> + }
> + }
> +
> + if (ab->hw_params->ring_mask->tx_mon_dest[grp_id]) {
this block of code has the same issues as the RX block. in fact it seems
that this block is identical to the block above other than the flag and
the tx_mon_desc vs rx_mon_desc, so I'm curious if it could be refactored
into a single function that could be used by both tx and rx instead of
duplicating code
> + for (i = 0; i < ab->num_radios; i++) {
> + for (j = 0; j < ab->hw_params->num_rxmda_per_pdev; j++) {
> + int id = i * ab->hw_params->num_rxmda_per_pdev + j;
> +
> + flag = ATH12K_DP_TX_MONITOR_MODE;
> +
> + if (ab->hw_params->ring_mask->tx_mon_dest[grp_id] &
> + BIT(id)) {
> + work_done =
> + ath12k_dp_mon_process_ring(ab, id, napi, budget,
> + flag);
> + budget -= work_done;
> + tot_work_done += work_done;
> +
> + if (budget <= 0)
> + goto done;
> + }
> + }
> + }
> + }
> +
> + if (ab->hw_params->ring_mask->reo_status[grp_id])
> + ath12k_dp_rx_process_reo_status(ab);
> +
> + if (ab->hw_params->ring_mask->host2rxdma[grp_id]) {
> + struct ath12k_dp *dp = &ab->dp;
> + struct dp_rxdma_ring *rx_ring = &dp->rx_refill_buf_ring;
> +
> + ath12k_dp_rx_bufs_replenish(ab, 0, rx_ring, 0,
> + ab->hw_params->hal_params->rx_buf_rbm,
> + true);
> + }
> +
> + /* TODO: Implement handler for other interrupts */
> +
> +done:
> + return tot_work_done;
> +}
> +
snip
> +int ath12k_dp_pdev_alloc(struct ath12k_base *ab)
> +{
> + struct ath12k *ar;
> + int ret;
> + int i;
> +
> + ret = ath12k_dp_rx_htt_setup(ab);
> + if (ret)
> + goto out;
> +
> + /* TODO: Per-pdev rx ring unlike tx ring which is mapped to different AC's */
> + for (i = 0; i < ab->num_radios; i++) {
> + ar = ab->pdevs[i].ar;
> + ret = ath12k_dp_rx_pdev_alloc(ab, i);
> + if (ret) {
> + ath12k_warn(ab, "failed to allocate pdev rx for pdev_id :%d\n",
> + i);
> + goto err;
> + }
> + ret = ath12k_dp_rx_pdev_mon_attach(ar);
> + if (ret) {
> + ath12k_warn(ab, "failed to initialize mon pdev %d\n",
> + i);
nit: unnecssary line break
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + ath12k_dp_pdev_free(ab);
> +out:
> + return ret;
> +}
> +
> +int ath12k_dp_htt_connect(struct ath12k_dp *dp)
> +{
> + struct ath12k_htc_svc_conn_req conn_req;
> + struct ath12k_htc_svc_conn_resp conn_resp;
> + int status;
> +
> + memset(&conn_req, 0, sizeof(conn_req));
> + memset(&conn_resp, 0, sizeof(conn_resp));
consider using = {} initializers
> +
> + conn_req.ep_ops.ep_tx_complete = ath12k_dp_htt_htc_tx_complete;
> + conn_req.ep_ops.ep_rx_complete = ath12k_dp_htt_htc_t2h_msg_handler;
> +
> + /* connect to control service */
> + conn_req.service_id = ATH12K_HTC_SVC_ID_HTT_DATA_MSG;
> +
> + status = ath12k_htc_connect_service(&dp->ab->htc, &conn_req,
> + &conn_resp);
> +
> + if (status)
> + return status;
> +
> + dp->eid = conn_resp.eid;
> +
> + return 0;
> +}
> +
snip
> +static void ath12k_dp_cc_cleanup(struct ath12k_base *ab)
> +{
> + struct ath12k_rx_desc_info *desc_info, *tmp;
> + struct ath12k_tx_desc_info *tx_desc_info, *tmp1;
> + struct ath12k_dp *dp = &ab->dp;
> + struct sk_buff *skb;
> + int i;
> +
> + if (!dp->spt_info)
> + return;
> +
> + /* RX Descriptor cleanup */
> + spin_lock_bh(&dp->rx_desc_lock);
> +
> + list_for_each_entry_safe(desc_info, tmp, &dp->rx_desc_used_list, list) {
> + list_del(&desc_info->list);
> + skb = desc_info->skb;
> +
> + if (!skb)
> + continue;
> +
> + dma_unmap_single(ab->dev, ATH12K_SKB_RXCB(skb)->paddr,
> + skb->len + skb_tailroom(skb), DMA_FROM_DEVICE);
> + dev_kfree_skb_any(skb);
> + }
> +
> + spin_unlock_bh(&dp->rx_desc_lock);
> +
> + /* TX Descriptor cleanup */
> + for (i = 0; i < ATH12K_HW_MAX_QUEUES; i++) {
> + spin_lock_bh(&dp->tx_desc_lock[i]);
> +
> + list_for_each_entry_safe(tx_desc_info, tmp1, &dp->tx_desc_used_list[i],
> + list) {
> + list_del(&tx_desc_info->list);
> + skb = tx_desc_info->skb;
> +
> + if (!skb)
> + continue;
> +
> + dma_unmap_single(ab->dev, ATH12K_SKB_RXCB(skb)->paddr,
why RXCB() in the TX path?
> + skb->len, DMA_TO_DEVICE);
> + dev_kfree_skb_any(skb);
> + }
> +
> + spin_unlock_bh(&dp->tx_desc_lock[i]);
> + }
> +
> + /* unmap SPT pages */
> + for (i = 0; i < dp->num_spt_pages; i++) {
> + if (!dp->spt_info[i].vaddr)
> + continue;
> +
> + dma_free_coherent(ab->dev, ATH12K_PAGE_SIZE,
> + dp->spt_info[i].vaddr, dp->spt_info[i].paddr);
> + dp->spt_info[i].vaddr = NULL;
> + }
> +
> + kfree(dp->spt_info);
> +}
> +
More information about the ath12k
mailing list