(subset) [PATCH v3 0/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise

Bjorn Andersson andersson at kernel.org
Mon Nov 16 17:04:51 PST 2026


On Fri, 23 Oct 2026 16:36:56 +0300, Andrei-Alexandru Bleortu wrote:
> Add the Ubiquiti UniFi U6 Enterprise, an IPQ5018 access point with two
> QCN9074 radios on PCIe (5 GHz and 6 GHz). The first patch documents the
> QCN9074's PCI ID in the ath11k PCI binding, so the radios' nodes can
> carry the calibration variants their board data is looked up by.
> 
> The Ethernet port (GMAC1 with a QCA8081 PHY) and the IPQ5018's own
> 2.4 GHz radio are left out until the GMAC and the WCSS remoteproc have
> bindings.
> 
> [...]

Applied, thanks!

[3/4] arm64: dts: qcom: ipq5018: enable the PRNG by default
      commit: d8e9ecf65afef7cd2bd40e8619b5f32fe6563fc1
[4/4] arm64: dts: qcom: ipq5018: add Ubiquiti UniFi U6 Enterprise
      commit: 97430c2c59285d3c965fbffec6df8d091c47ca5b

Best regards,
-- 
Bjorn Andersson <andersson at kernel.org>



More information about the ath11k mailing list