ath11k: WCN6855 on Lenovo (17aa:9309) uses generic regdb, 5 GHz passive-only
Baochen Qiang
baochen.qiang at oss.qualcomm.com
Sun Nov 15 21:16:39 PST 2026
On 11/15/2026 9:16 PM, alexiscalin wrote:
> Hardware: ThinkPad P14s Gen 5 AMD (21ME), Qualcomm QCNFA765 / WCN6855
> hw2.1 [17cb:1103], subsystem 17aa:9309, chip_id 0x12, board_id 0xff.
> Firmware: WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41
> board-2.bin: atheros-firmware-20261019 (Fedora 44)
> Kernel: 7.2.13 (ath11k identical to v7.2.13)
>
> ath11k finds the board data for the Lenovo variant (SMBIOS type 0xf8
> "LE"):
>
> boot found board data for 'bus=pci,vendor=17cb,device=1103,
> subsystem-vendor=17aa,subsystem-device=9309,qmi-chip-id=18,
> qmi-board-id=255,variant=LE'
>
> but there is no regdb for it, so it falls back to the generic one:
>
> boot failed to fetch regdb data for bus=pci,vendor=17cb,device=1103,
> subsystem-vendor=17aa,subsystem-device=9309,qmi-chip-id=18,
> qmi-board-id=255,variant=LE from ath11k/WCN6855/hw2.1/board-2.bin
> boot found match regdb data for name 'bus=pci'
>
> board-2.bin has 16 board entries for Lenovo (subsystem-device 9308,
> 9309, 930a and e0be) but no Lenovo regdb entry. Its 35 regdb entries are
> the generic 'bus=pci' one and 34 for HP (subsystem-vendor 105b).
>
> With the generic regdb, the firmware's default country is BR, and every
> 5 GHz rule it reports has REGULATORY_CHAN_NO_IR (FLAGS 2), also after
> 11d has switched the country to US or FR:
>
> wmi cc_ext BR dfs 0 ...
> wmi reg rule 1: (5170 - 5330 @ 160) (0, 20) (FLAGS 2)
> wmi reg rule 2: (5490 - 5730 @ 160) (0, 20) (FLAGS 2)
> wmi reg rule 3: (5735 - 5895 @ 160) (0, 20) (FLAGS 2)
>
> So all 28 5 GHz channels are scanned passively, including the non-DFS
> ones. For FR, wireless-regdb (iw reg get, global) has no NO-IR on these
> ranges, but the device reports:
>
> global: (5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
> (5725 - 5875 @ 80), (N/A, 13), (N/A)
> phy: (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
> (5735 - 5855 @ 80), (N/A, 14), (N/A), AUTO-BW, PASSIVE-SCAN
>
> A full scan takes about 5 s, of which the 28 passive 5 GHz channels at a
> 150 ms dwell time account for about 4.2 s. This delays every connection
> that needs a scan, e.g., Wi-Fi after resume: with NetworkManager, Wi-Fi
> is back 6.6-7.7 s after the wake-up alarm. For comparison, an Intel 8265
> laptop measured the same way takes 5.4-5.5 s. (An additional scan done
> by wpa_supplicant after resume, which made it 12.6-12.7 s, is a separate
> wpa_supplicant issue and has been reported on the hostap list:
> "wpa_supplicant: Initialize is_6ghz_enabled when adding an interface".)
>
> Could a regdb for the Lenovo WCN6855 variants be added to board-2.bin,
> as was done for HP? I can test a candidate file on this machine.
>
likely same to [1], which, sadly, still has not got resolved. I will ask firmware team to
speed up.
[1]
https://lore.kernel.org/ath11k/CALOnm7APGpVWcx45O78fa4hOCUGDc0-ywGoqicr51YtpxNueLg@mail.gmail.com/
More information about the ath11k
mailing list