[PATCH v2 7/7] arm64: dts: qcom: milos-fairphone-fp6: Enable WiFi

[Konrad Dybcio]

On 5/4/26 3:21 PM, Luca Weiss wrote:
> On Mon May 4, 2026 at 3:10 PM CEST, Konrad Dybcio wrote:
>> On 5/1/26 11:20 AM, Luca Weiss wrote:
>>> Hi Konrad,
>>>
>>> On Tue Apr 7, 2026 at 3:16 PM CEST, Konrad Dybcio wrote:
>>>> On 4/3/26 9:35 PM, Dmitry Baryshkov wrote:
>>>>> On Fri, Apr 03, 2026 at 03:52:53PM +0200, Luca Weiss wrote:
>>>>>> Configure and enable the WiFi node, and add the required pinctrl to
>>>>>> provide the sleep clock from the PMK8550 (PMK7635) to WCN6755.
>>>>>>
>>>>>> Thanks to Alexander Koskovich for helping with the bringup, adding
>>>>>> the missing pinctrl to make the WPSS stop crashing.
>>>>>>
>>>>>> Link: https://lore.kernel.org/linux-arm-msm/DBF7OWAWQ94M.FSCP4DPF8ZJY@fairphone.com/
>>>>>> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at oss.qualcomm.com>
>>>>>> Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
>>>>>> ---
>>>>>>  arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 19 ++++++++++++++++++-
>>>>>>  1 file changed, 18 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
>>>>>> index db72418b7195..d8ac495ca7c8 100644
>>>>>> --- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
>>>>>> +++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
>>>>>> @@ -242,7 +242,7 @@ wcn6750-pmu {
>>>>>>  
>>>>>>  		clocks = <&rpmhcc RPMH_RF_CLK1>;
>>>>>>  
>>>>>> -		pinctrl-0 = <&bluetooth_enable_default>;
>>>>>> +		pinctrl-0 = <&bluetooth_enable_default>, <&pmk8550_sleep_clk_default>;
>>>>>>  		pinctrl-names = "default";
>>>>>>  
>>>>>>  		regulators {
>>>>>> @@ -766,6 +766,17 @@ &pmiv0104_eusb2_repeater {
>>>>>>  	qcom,tune-usb2-preem = /bits/ 8 <0x6>;
>>>>>>  };
>>>>>>  
>>>>>> +&pmk8550_gpios {
>>>>>> +	pmk8550_sleep_clk_default: sleep-clk-default-state {
>>>>>> +		pins = "gpio5";
>>>>>> +		function = "func1";
>>>>>> +		input-disable;
>>>>>> +		output-enable;
>>>>>
>>>>> Hmm, if it's a sleep_clk, should it not be handled via the power
>>>>> sequencer?
>>>>
>>>> If you mean that it may be needed to toggle it with specific timings,
>>>> possibly..  seems that WCN6855 has a "xo-clk" GPIO defined. I requested
>>>> access to some docs that I think should have the answer, hopefully should
>>>> get it soon.
>>>
>>> Did you manage to get anything there yet?
>>
>> Yeah, sorry, it got lost in the sea of emails..
>>
>> The PDF talks about the electrical requirements of the clock signal and
>> the section titled "Power-up sequence timing" doesn't mention it at all,
>> so my assumption would be "OK so long as it's ticking before you power
>> up the WCN"
> 
> Thanks for checking!
> 
> Is this an R-b then?

Yes

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad