[PATCH ath-next 1/6] wifi: ath11k: Add initialization and deinitialization sequence for CFR module

[Baochen Qiang]

On 10/30/2025 12:31 PM, Yu Zhang(Yuriy) wrote:

> +void ath11k_cfr_deinit(struct ath11k_base *ab)
> +{
> +	struct ath11k_pdev *pdev;
> +	struct ath11k_cfr *cfr;
> +	struct ath11k *ar;
> +	int i;
> +
> +	if (!test_bit(WMI_TLV_SERVICE_CFR_CAPTURE_SUPPORT, ab->wmi_ab.svc_map) ||
> +	    !ab->hw_params.cfr_support)
> +		return;
> +
> +	for (i = 0; i <  ab->num_radios; i++) {
> +		pdev = rcu_dereference(ab->pdevs_active[i]);

_deinit() runs during driver unload etc where pdev may not be active hence issues can be
expected?

besides, pdevs_active used here but pdev used in _init() ...

IMO, we don't need pdev to be active here

> +		if (pdev && pdev->ar) {
> +			ar = ab->pdevs[i].ar;
> +			cfr = &ar->cfr;
> +
> +			ath11k_cfr_ring_free(ar);
> +
> +			spin_lock_bh(&cfr->lut_lock);
> +			kfree(cfr->lut);
> +			cfr->lut = NULL;
> +			spin_unlock_bh(&cfr->lut_lock);
> +		}
> +	}
> +}
> +
> +int ath11k_cfr_init(struct ath11k_base *ab)
> +{
> +	struct ath11k_dbring_cap db_cap;
> +	struct ath11k_cfr *cfr;
> +	u32 num_lut_entries;
> +	struct ath11k *ar;
> +	int i, ret;
> +
> +	if (!test_bit(WMI_TLV_SERVICE_CFR_CAPTURE_SUPPORT, ab->wmi_ab.svc_map) ||
> +	    !ab->hw_params.cfr_support)
> +		return 0;
> +
> +	for (i = 0; i < ab->num_radios; i++) {
> +		ar = ab->pdevs[i].ar;
> +		cfr = &ar->cfr;
> +
> +		ret = ath11k_dbring_get_cap(ar->ab, ar->pdev_idx,
> +					    WMI_DIRECT_BUF_CFR, &db_cap);
> +		if (ret)
> +			continue;
> +
> +		idr_init(&cfr->rx_ring.bufs_idr);
> +		spin_lock_init(&cfr->rx_ring.idr_lock);
> +		spin_lock_init(&cfr->lock);
> +		spin_lock_init(&cfr->lut_lock);
> +
> +		num_lut_entries = min_t(u32, CFR_MAX_LUT_ENTRIES, db_cap.min_elem);
> +		cfr->lut = kcalloc(num_lut_entries, sizeof(*cfr->lut),
> +				   GFP_KERNEL);
> +		if (!cfr->lut) {
> +			ret = -ENOMEM;
> +			goto err;
> +		}
> +
> +		ret = ath11k_cfr_ring_alloc(ar, &db_cap);
> +		if (ret) {
> +			ath11k_warn(ab, "failed to init cfr ring for pdev %d: %d\n",
> +				    i, ret);
> +			goto err;

you need to free lut before jumping to error handling

> +		}
> +
> +		cfr->lut_num = num_lut_entries;
> +	}
> +
> +	return 0;
> +
> +err:
> +	for (i = i - 1; i >= 0; i--) {
> +		ar = ab->pdevs[i].ar;
> +		cfr = &ar->cfr;
> +
> +		ath11k_cfr_ring_free(ar);
> +
> +		spin_lock_bh(&cfr->lut_lock);
> +		kfree(cfr->lut);
> +		cfr->lut = NULL;
> +		spin_unlock_bh(&cfr->lut_lock);
> +	}
> +	return ret;
> +}