[PATCH v4 02/11] PCI/bwctrl: Add support to scale bandwidth before & after link re-training
Manivannan Sadhasivam
mani at kernel.org
Tue Jul 8 09:25:33 PDT 2025
On Mon, Jun 09, 2025 at 04:21:23PM GMT, Krishna Chaitanya Chundru wrote:
> If the driver wants to move to higher data rate/speed than the current data
s/driver/PCI client driver
> rate then the controller driver may need to change certain votes so that
> link may come up at requested data rate/speed like QCOM PCIe controllers
> need to change their RPMh (Resource Power Manager-hardened) state. Once
> link retraining is done controller drivers needs to adjust their votes
> based on the final data rate.
>
> Some controllers also may need to update their bandwidth voting like
> ICC BW votings etc.
>
> So, add pre_link_speed_change() & post_link_speed_change() op to call
> before & after the link re-train. There is no explicit locking mechanisms
> as these are called by a single client Endpoint driver.
>
What if client drivers of multiple endpoints connected to different RP of the
same Host Bridge call this API? Won't you need locking?
- Mani
> In case of PCIe switch, if there is a request to change target speed for a
> downstream port then no need to call these function ops as these are
> outside the scope of the controller drivers.
>
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru at oss.qualcomm.com>
> ---
> drivers/pci/pcie/bwctrl.c | 15 +++++++++++++++
> include/linux/pci.h | 18 ++++++++++++++++++
> 2 files changed, 33 insertions(+)
>
> diff --git a/drivers/pci/pcie/bwctrl.c b/drivers/pci/pcie/bwctrl.c
> index 36f939f23d34e8a3b25a2d1b9059e015f298ca94..dafb8d4f1cfba987e1ff08edfc7caba527f0c76b 100644
> --- a/drivers/pci/pcie/bwctrl.c
> +++ b/drivers/pci/pcie/bwctrl.c
> @@ -140,6 +140,8 @@ static int pcie_bwctrl_change_speed(struct pci_dev *port, u16 target_speed, bool
> int pcie_set_target_speed(struct pci_dev *port, enum pci_bus_speed speed_req,
> bool use_lt)
> {
> + struct pci_host_bridge *host = pci_find_host_bridge(port->bus);
> + bool is_rootbus = pci_is_root_bus(port->bus);
> struct pci_bus *bus = port->subordinate;
> u16 target_speed;
> int ret;
> @@ -152,6 +154,16 @@ int pcie_set_target_speed(struct pci_dev *port, enum pci_bus_speed speed_req,
>
> target_speed = pcie_bwctrl_select_speed(port, speed_req);
>
> + /*
> + * The host bridge driver may need to be scaled for targeted speed
> + * otherwise link might not come up at requested speed.
> + */
> + if (is_rootbus && host->pre_link_speed_change) {
> + ret = host->pre_link_speed_change(host, port, target_speed);
> + if (ret)
> + return ret;
> + }
> +
> scoped_guard(rwsem_read, &pcie_bwctrl_setspeed_rwsem) {
> struct pcie_bwctrl_data *data = port->link_bwctrl;
>
> @@ -176,6 +188,9 @@ int pcie_set_target_speed(struct pci_dev *port, enum pci_bus_speed speed_req,
> !list_empty(&bus->devices))
> ret = -EAGAIN;
>
> + if (bus && is_rootbus && host->post_link_speed_change)
> + host->post_link_speed_change(host, port, pci_bus_speed2lnkctl2(bus->cur_bus_speed));
> +
> return ret;
> }
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 05e68f35f39238f8b9ce08df97b384d1c1e89bbe..1740bab514b0a9a61c027463a1fb154843312a22 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -599,6 +599,24 @@ struct pci_host_bridge {
> void (*release_fn)(struct pci_host_bridge *);
> int (*enable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> void (*disable_device)(struct pci_host_bridge *bridge, struct pci_dev *dev);
> + /*
> + * Callback to the host bridge drivers to update ICC BW votes, clock
> + * frequencies etc.. for the link re-train to come up in targeted speed.
> + * These are intended to be called by devices directly attached to the
> + * Root Port. These are called by a single client Endpoint driver, so
> + * there is no need for explicit locking mechanisms.
> + */
> + int (*pre_link_speed_change)(struct pci_host_bridge *bridge,
> + struct pci_dev *dev, int speed);
> + /*
> + * Callback to the host bridge drivers to adjust ICC BW votes, clock
> + * frequencies etc.. to the updated speed after link re-train. These
> + * are intended to be called by devices directly attached to the
> + * Root Port. These are called by a single client Endpoint driver,
> + * so there is no need for explicit locking mechanisms.
> + */
> + void (*post_link_speed_change)(struct pci_host_bridge *bridge,
> + struct pci_dev *dev, int speed);
> void *release_data;
> unsigned int ignore_reset_delay:1; /* For entire hierarchy */
> unsigned int no_ext_tags:1; /* No Extended Tags */
>
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
More information about the ath11k
mailing list