[PATCH v2 03/10] PCI: dwc: Implement .pre_scale_bus_bw() & .post_scale_bus_bw hook

[Manivannan Sadhasivam]

On Thu, Mar 13, 2025 at 05:10:10PM +0530, Krishna Chaitanya Chundru wrote:
> Add support for pre_scale_bus_bw() & post_scale_bus_bw() function op's.
> Add support for DWC glue drivers to register for these ops.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru at oss.qualcomm.com>
> ---
>  drivers/pci/controller/dwc/pcie-designware-host.c | 21 +++++++++++++++++++++
>  drivers/pci/controller/dwc/pcie-designware.h      |  2 ++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index ffaded8f2df7..4da4df62c3f8 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -697,10 +697,31 @@ void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus, unsigned int devfn,
>  }
>  EXPORT_SYMBOL_GPL(dw_pcie_own_conf_map_bus);
>  
> +static int dw_pcie_pre_scale_bus_bw(struct pci_bus *bus, int target_speed)
> +{
> +	struct dw_pcie_rp *pp = bus->sysdata;
> +	int ret = 0;
> +
> +	if (pp->ops->pre_scale_bus_bw)
> +		ret = pp->ops->pre_scale_bus_bw(pp, target_speed);
> +
> +	return ret;
> +}
> +
> +static void dw_pcie_post_scale_bus_bw(struct pci_bus *bus, int current_speed)
> +{
> +	struct dw_pcie_rp *pp = bus->sysdata;
> +
> +	if (pp->ops->pre_scale_bus_bw)
> +		pp->ops->post_scale_bus_bw(pp, current_speed);
> +}
> +
>  static struct pci_ops dw_pcie_ops = {
>  	.map_bus = dw_pcie_own_conf_map_bus,
>  	.read = pci_generic_config_read,
>  	.write = pci_generic_config_write,
> +	.pre_scale_bus_bw = dw_pcie_pre_scale_bus_bw,
> +	.post_scale_bus_bw = dw_pcie_post_scale_bus_bw,

Please do not add these multi level ops without necessity. Just populate the
callbacks in qcom_pcie_host_init(). DWC has nothing to do with these callbacks.

- Mani

-- 
மணிவண்ணன் சதாசிவம்