[PATCH v4] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

[Miaoqing Pan]

On 10/10/2024 10:40 PM, Dmitry Baryshkov wrote:
> On Thu, Oct 10, 2024 at 09:59:11PM GMT, Miaoqing Pan wrote:
>>
>>
>> On 10/10/2024 9:47 PM, Dmitry Baryshkov wrote:
>>> On Thu, Oct 10, 2024 at 09:29:02PM GMT, Miaoqing Pan wrote:
>>>> Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
>>>> board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
>>>>
>>>> Signed-off-by: Miaoqing Pan <quic_miaoqing at quicinc.com>
>>>> ---
>>>> v2:
>>>>     - fix wcn6855-pmu compatible to "qcom,wcn6855-pmu".
>>>>     - relocate pcieport0 node in alphabetical order.
>>>> v3:
>>>>     - add 'qcom,ath11k-calibration-variant = "SA8775P"'.
>>>> v4:
>>>>     - update 'ath11k-calibration-variant' to "Ride".
>>>
>>> What exactly is Ride? Is there just one Ride board? I thought it's a
>>> board family name.
>>
>> I just follow the existing boards, 'Ride' is a board name. Both 'Ride' and
>> 'Ride r3' boards are attached with WCN6855 WLAN chip.
>>
>> arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts:1112:
>> qcom,ath11k-calibration-variant = "Fairphone_5";
>> arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts:958:
>> qcom,ath11k-calibration-variant = "SHIFTphone_8";
>> arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts:879:	
>> qcom,ath11k-calibration-variant = "LE_X13S";
> 
> There definitely are other Ride boards. I see patches related to
> qcs8300-ride. Does that board use the same BDF file?  If not,
> Qualcomm_SA8775P_Ride or QC_SA8775P_Ride sounds like a better approach.
> 

QCS8300 and SA8775P both use the same WiFi card, so the same BDF file 
will be used. The extra variant will increase the size of board-2.bin.

Anyway, the calibration variant is no other side effects.

>>>
>>> Also, could you please extend the commit message with messages from the
>>> ath11k driver, showing the chip_id / board_id ?
>>
>> The board-id is non 0xff, do you still think we need to add
>> 'qcom,ath11k-calibration-variant', following is the WLAN chip board data
>> info,
>>
>> bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=519.bin
> 
> I'd ask Kalle / Jeff to answer this question. Are we sure that this
> board-id won't be reused by any else device?
>