[PATCH v4] arm64: dts: qcom: sa8775p-ride: add WiFi/BT nodes

[Miaoqing Pan]

On 10/10/2024 9:47 PM, Dmitry Baryshkov wrote:
> On Thu, Oct 10, 2024 at 09:29:02PM GMT, Miaoqing Pan wrote:
>> Add a node for the PMU module of the WCN6855 present on the sa8775p-ride
>> board. Assign its LDO power outputs to the existing WiFi/Bluetooth module.
>>
>> Signed-off-by: Miaoqing Pan <quic_miaoqing at quicinc.com>
>> ---
>> v2:
>>    - fix wcn6855-pmu compatible to "qcom,wcn6855-pmu".
>>    - relocate pcieport0 node in alphabetical order.
>> v3:
>>    - add 'qcom,ath11k-calibration-variant = "SA8775P"'.
>> v4:
>>    - update 'ath11k-calibration-variant' to "Ride".
> 
> What exactly is Ride? Is there just one Ride board? I thought it's a
> board family name.

I just follow the existing boards, 'Ride' is a board name. Both 'Ride' 
and 'Ride r3' boards are attached with WCN6855 WLAN chip.

arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts:1112: 
qcom,ath11k-calibration-variant = "Fairphone_5";
arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts:958: 
qcom,ath11k-calibration-variant = "SHIFTphone_8";
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts:879:	 
qcom,ath11k-calibration-variant = "LE_X13S";

> 
> Also, could you please extend the commit message with messages from the
> ath11k driver, showing the chip_id / board_id ?

The board-id is non 0xff, do you still think we need to add 
'qcom,ath11k-calibration-variant', following is the WLAN chip board data 
info,

bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=519.bin