[PATCH 3/6] wifi: ath11k: implement handling of P2P NoA event

Kang Yang quic_kangyang at quicinc.com
Mon Feb 26 19:16:50 PST 2024



On 2/27/2024 3:53 AM, Jeff Johnson wrote:
> On 2/25/2024 10:02 PM, Kang Yang wrote:
>> The NoA(Notice of Absence) attribute is used by the P2P Group Owner to
>> signal its absence due to power save timing, concurrent operation, or
>> off-channel scanning. It is also used in the P2P Presence Request-Response
>> mechanism.
>>
>> The NoA attribute shall be present in the P2P IE in the beacon frames
>> transmitted by a P2P Group Owner when a NoA schedule is being advertised,
>> or when the CTWindow is non-zero.
>>
>> So add support to update P2P information after P2P GO is up through
>> event WMI_P2P_NOA_EVENTID, and always put it in probe resp.
>>
>> Create p2p.c and p2p.h for P2P related functions and definitions.
>>
>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37
>> Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2
>>
>> Signed-off-by: Kang Yang <quic_kangyang at quicinc.com>
>> ---
>>   drivers/net/wireless/ath/ath11k/Makefile |   3 +-
>>   drivers/net/wireless/ath/ath11k/p2p.c    | 145 +++++++++++++++++++++++
>>   drivers/net/wireless/ath/ath11k/p2p.h    |  23 ++++
>>   drivers/net/wireless/ath/ath11k/wmi.c    |  57 ++++++++-
>>   drivers/net/wireless/ath/ath11k/wmi.h    |  31 +++++
>>   5 files changed, 257 insertions(+), 2 deletions(-)
>>   create mode 100644 drivers/net/wireless/ath/ath11k/p2p.c
>>   create mode 100644 drivers/net/wireless/ath/ath11k/p2p.h
>>
>> diff --git a/drivers/net/wireless/ath/ath11k/Makefile b/drivers/net/wireless/ath/ath11k/Makefile
>> index 2c94d50ae36f..43d2d8ddcdc0 100644
>> --- a/drivers/net/wireless/ath/ath11k/Makefile
>> +++ b/drivers/net/wireless/ath/ath11k/Makefile
>> @@ -18,7 +18,8 @@ ath11k-y += core.o \
>>   	    dbring.o \
>>   	    hw.o \
>>   	    pcic.o \
>> -	    fw.o
>> +	    fw.o \
>> +	    p2p.o
>>   
>>   ath11k-$(CONFIG_ATH11K_DEBUGFS) += debugfs.o debugfs_htt_stats.o debugfs_sta.o
>>   ath11k-$(CONFIG_NL80211_TESTMODE) += testmode.o
>> diff --git a/drivers/net/wireless/ath/ath11k/p2p.c b/drivers/net/wireless/ath/ath11k/p2p.c
>> new file mode 100644
>> index 000000000000..bfaeea12bc09
>> --- /dev/null
>> +++ b/drivers/net/wireless/ath/ath11k/p2p.c
>> @@ -0,0 +1,145 @@
>> +// SPDX-License-Identifier: BSD-3-Clause-Clear
>> +/*
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#include "core.h"
>> +#include "wmi.h"
>> +#include "mac.h"
>> +#include "p2p.h"
>> +
>> +static void ath11k_p2p_noa_ie_fill(u8 *data, size_t len,
>> +				   const struct ath11k_wmi_p2p_noa_info *noa)
>> +{
>> +	struct ieee80211_p2p_noa_attr *noa_attr;
>> +	u8 ctwindow = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_CTWIN_TU);
>> +	bool oppps = u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS);
>> +	__le16 *noa_attr_len;
>> +	u16 attr_len;
>> +	u8 noa_descriptors = u32_get_bits(noa->noa_attr,
>> +					   WMI_P2P_NOA_INFO_DESC_NUM);
> 
> do you need to validate that this doesn't exceed
> WMI_P2P_MAX_NOA_DESCRIPTORS?

Will add this check.

> 
>> +	int i;
>> +
>> +	/* P2P IE */
>> +	data[0] = WLAN_EID_VENDOR_SPECIFIC;
>> +	data[1] = len - 2;
>> +	data[2] = (WLAN_OUI_WFA >> 16) & 0xff;
>> +	data[3] = (WLAN_OUI_WFA >> 8) & 0xff;
>> +	data[4] = (WLAN_OUI_WFA >> 0) & 0xff;
>> +	data[5] = WLAN_OUI_TYPE_WFA_P2P;
>> +
>> +	/* NOA ATTR */
>> +	data[6] = IEEE80211_P2P_ATTR_ABSENCE_NOTICE;
>> +	noa_attr_len = (__le16 *)&data[7]; /* 2 bytes */
>> +	noa_attr = (struct ieee80211_p2p_noa_attr *)&data[9];
>> +
>> +	noa_attr->index = u32_get_bits(noa->noa_attr,
>> +				       WMI_P2P_NOA_INFO_INDEX);
>> +	noa_attr->oppps_ctwindow = ctwindow;
>> +	if (oppps)
>> +		noa_attr->oppps_ctwindow |= IEEE80211_P2P_OPPPS_ENABLE_BIT;
>> +
>> +	for (i = 0; i < noa_descriptors; i++) {
>> +		noa_attr->desc[i].count = noa->descriptors[i].type_count;
>> +		noa_attr->desc[i].duration =
>> +			cpu_to_le32(noa->descriptors[i].duration);
>> +		noa_attr->desc[i].interval =
>> +			cpu_to_le32(noa->descriptors[i].interval);
>> +		noa_attr->desc[i].start_time =
>> +			cpu_to_le32(noa->descriptors[i].start_time);
>> +	}
>> +
>> +	attr_len = 2; /* index + oppps_ctwindow */
>> +	attr_len += noa_descriptors * sizeof(struct ieee80211_p2p_noa_desc);
>> +	*noa_attr_len = __cpu_to_le16(attr_len);
>> +}
>> +
>> +static size_t
>> +ath11k_p2p_noa_ie_len_compute(const struct ath11k_wmi_p2p_noa_info *noa)
>> +{
>> +	size_t len = 0;
>> +
>> +	if (!(u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM)) &&
>> +	    !(u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_OPP_PS)))
>> +		return 0;
>> +
>> +	len += 1 + 1 + 4; /* EID + len + OUI */
>> +	len += 1 + 2; /* noa attr + attr len */
>> +	len += 1 + 1; /* index + oppps_ctwindow */
>> +	len += u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM) *
> 
> here again do you need to validate that this doesn't exceed
> WMI_P2P_MAX_NOA_DESCRIPTORS?
> 
> also rather than call u32_get_bits() twice for the same field, call it
> once and cache the result
> 
>> +			sizeof(struct ieee80211_p2p_noa_desc);
>> +
>> +	return len;
>> +}
>> +
>> +static void ath11k_p2p_noa_ie_assign(struct ath11k_vif *arvif, void *ie,
>> +				     size_t len)
>> +{
>> +	struct ath11k *ar = arvif->ar;
>> +
>> +	lockdep_assert_held(&ar->data_lock);
>> +
>> +	kfree(arvif->u.ap.noa_data);
>> +
>> +	arvif->u.ap.noa_data = ie;
>> +	arvif->u.ap.noa_len = len;
>> +}
>> +
>> +static void __ath11k_p2p_noa_update(struct ath11k_vif *arvif,
>> +				    const struct ath11k_wmi_p2p_noa_info *noa)
>> +{
>> +	struct ath11k *ar = arvif->ar;
>> +	void *ie;
>> +	size_t len;
>> +
>> +	lockdep_assert_held(&ar->data_lock);
>> +
>> +	ath11k_p2p_noa_ie_assign(arvif, NULL, 0);
>> +
>> +	len = ath11k_p2p_noa_ie_len_compute(noa);
>> +	if (!len)
>> +		return;
>> +
>> +	ie = kmalloc(len, GFP_ATOMIC);
>> +	if (!ie)
>> +		return;
>> +
>> +	ath11k_p2p_noa_ie_fill(ie, len, noa);
>> +	ath11k_p2p_noa_ie_assign(arvif, ie, len); }
>> +
>> +void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
>> +			   const struct ath11k_wmi_p2p_noa_info *noa)
>> +{
>> +	struct ath11k *ar = arvif->ar;
>> +
>> +	spin_lock_bh(&ar->data_lock);
>> +	__ath11k_p2p_noa_update(arvif, noa);
>> +	spin_unlock_bh(&ar->data_lock);
>> +}
>> +
>> +static void ath11k_p2p_noa_update_vdev_iter(void *data, u8 *mac,
>> +					    struct ieee80211_vif *vif)
>> +{
>> +	struct ath11k_vif *arvif = ath11k_vif_to_arvif(vif);
>> +	struct ath11k_p2p_noa_arg *arg = data;
>> +
>> +	if (arvif->vdev_id != arg->vdev_id)
>> +		return;
>> +
>> +	ath11k_p2p_noa_update(arvif, arg->noa);
>> +}
>> +
>> +void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
>> +				      const struct ath11k_wmi_p2p_noa_info *noa)
>> +{
>> +	struct ath11k_p2p_noa_arg arg = {
>> +		.vdev_id = vdev_id,
>> +		.noa = noa,
>> +	};
>> +
>> +	ieee80211_iterate_active_interfaces_atomic(ar->hw,
>> +						   IEEE80211_IFACE_ITER_NORMAL,
>> +						   ath11k_p2p_noa_update_vdev_iter,
>> +						   &arg);
>> +}
>> +
> 
> As part of "b4 shazam" I'm getting:
> ath/.git/rebase-apply/patch:175: new blank line at EOF.
> +
> 
> which I think comes from here. so remove the blank line at the end of file
> 
>> diff --git a/drivers/net/wireless/ath/ath11k/p2p.h b/drivers/net/wireless/ath/ath11k/p2p.h
>> new file mode 100644
>> index 000000000000..ebd076f7fe7f
>> --- /dev/null
>> +++ b/drivers/net/wireless/ath/ath11k/p2p.h
>> @@ -0,0 +1,23 @@
>> +/* SPDX-License-Identifier: BSD-3-Clause-Clear */
>> +/*
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +#ifndef ATH11K_P2P_H
>> +#define ATH11K_P2P_H
>> +
>> +#include "wmi.h"
>> +
>> +struct ath11k_wmi_p2p_noa_info;
>> +
>> +struct ath11k_p2p_noa_arg {
>> +	u32 vdev_id;
>> +	const struct ath11k_wmi_p2p_noa_info *noa;
>> +};
>> +
>> +void ath11k_p2p_noa_update(struct ath11k_vif *arvif,
>> +			   const struct ath11k_wmi_p2p_noa_info *noa);
>> +void ath11k_p2p_noa_update_by_vdev_id(struct ath11k *ar, u32 vdev_id,
>> +				      const struct ath11k_wmi_p2p_noa_info *noa);
>> +#endif
>> +
> 
> ditto here:
> ath/.git/rebase-apply/patch:204: new blank line at EOF.
> +
> 
> 
>> diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
>> index d86fcdd374c6..bbccddd7d729 100644
>> --- a/drivers/net/wireless/ath/ath11k/wmi.c
>> +++ b/drivers/net/wireless/ath/ath11k/wmi.c
>> @@ -20,6 +20,7 @@
>>   #include "hw.h"
>>   #include "peer.h"
>>   #include "testmode.h"
>> +#include "p2p.h"
>>   
>>   struct wmi_tlv_policy {
>>   	size_t min_len;
>> @@ -154,6 +155,10 @@ static const struct wmi_tlv_policy wmi_tlv_policies[] = {
>>   		.min_len = sizeof(struct wmi_per_chain_rssi_stats) },
>>   	[WMI_TAG_TWT_ADD_DIALOG_COMPLETE_EVENT] = {
>>   		.min_len = sizeof(struct wmi_twt_add_dialog_event) },
>> +	[WMI_TAG_P2P_NOA_INFO] = {
>> +		.min_len = sizeof(struct ath11k_wmi_p2p_noa_info) },
>> +	[WMI_TAG_P2P_NOA_EVENT] = {
>> +		.min_len = sizeof(struct wmi_p2p_noa_event) },
>>   };
>>   
>>   #define PRIMAP(_hw_mode_) \
>> @@ -981,7 +986,7 @@ int ath11k_wmi_vdev_start(struct ath11k *ar, struct wmi_vdev_start_req_arg *arg,
>>   		      FIELD_PREP(WMI_TLV_LEN, 0);
>>   
>>   	/* Note: This is a nested TLV containing:
>> -	 * [wmi_tlv][wmi_p2p_noa_descriptor][wmi_tlv]..
>> +	 * [wmi_tlv][ath11k_wmi_p2p_noa_descriptor][wmi_tlv]..
>>   	 */
>>   
>>   	ptr += sizeof(*tlv);
>> @@ -8645,6 +8650,53 @@ static void ath11k_wmi_gtk_offload_status_event(struct ath11k_base *ab,
>>   	kfree(tb);
>>   }
>>   
>> +static int ath11k_wmi_p2p_noa_event(struct ath11k_base *ab,
>> +				    struct sk_buff *skb)
>> +{
>> +	const void **tb;
>> +	const struct wmi_p2p_noa_event *ev;
>> +	const struct ath11k_wmi_p2p_noa_info *noa;
>> +	struct ath11k *ar;
>> +	int ret, vdev_id;
>> +
>> +	tb = ath11k_wmi_tlv_parse_alloc(ab, skb, GFP_ATOMIC);
>> +	if (IS_ERR(tb)) {
>> +		ret = PTR_ERR(tb);
>> +		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ev = tb[WMI_TAG_P2P_NOA_EVENT];
>> +	noa = tb[WMI_TAG_P2P_NOA_INFO];
>> +
>> +	if (!ev || !noa) {
>> +		ret = -EPROTO;
>> +		goto out;
>> +	}
>> +
>> +	vdev_id = ev->vdev_id;
>> +
>> +	ath11k_dbg(ab, ATH11K_DBG_WMI,
>> +		   "wmi tlv p2p noa vdev_id %i descriptors %u\n",
>> +		   vdev_id, u32_get_bits(noa->noa_attr, WMI_P2P_NOA_INFO_DESC_NUM));
>> +	rcu_read_lock();
>> +	ar = ath11k_mac_get_ar_by_vdev_id(ab, vdev_id);
>> +	if (!ar) {
>> +		ath11k_warn(ab, "invalid vdev id %d in P2P NoA event\n",
>> +			    vdev_id);
>> +		ret = -EINVAL;
>> +		goto unlock;
>> +	}
>> +
>> +	ath11k_p2p_noa_update_by_vdev_id(ar, vdev_id, noa);
>> +
>> +unlock:
>> +	rcu_read_unlock();
>> +out:
>> +	kfree(tb);
>> +	return 0;
>> +}
>> +
>>   static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
>>   {
>>   	struct wmi_cmd_hdr *cmd_hdr;
>> @@ -8772,6 +8824,9 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
>>   	case WMI_GTK_OFFLOAD_STATUS_EVENTID:
>>   		ath11k_wmi_gtk_offload_status_event(ab, skb);
>>   		break;
>> +	case WMI_P2P_NOA_EVENTID:
>> +		ath11k_wmi_p2p_noa_event(ab, skb);
>> +		break;
>>   	default:
>>   		ath11k_dbg(ab, ATH11K_DBG_WMI, "unsupported event id 0x%x\n", id);
>>   		break;
>> diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
>> index 4c20202947c7..564f4a9ac8ce 100644
>> --- a/drivers/net/wireless/ath/ath11k/wmi.h
>> +++ b/drivers/net/wireless/ath/ath11k/wmi.h
> 
> drivers/net/wireless/ath/ath11k/wmi.h QuIC copyright missing 2024
> 
>> @@ -3630,6 +3630,37 @@ struct wmi_ftm_event_msg {
>>   	u8 data[];
>>   } __packed;
>>   
>> +#define WMI_P2P_MAX_NOA_DESCRIPTORS		4
>> +
>> +struct wmi_p2p_noa_event {
>> +	u32 vdev_id;
>> +} __packed;
>> +
>> +struct ath11k_wmi_p2p_noa_descriptor {
>> +	u32 type_count; /* 255: continuous schedule, 0: reserved */
>> +	u32 duration;  /* Absent period duration in micro seconds */
>> +	u32 interval;   /* Absent period interval in micro seconds */
>> +	u32 start_time; /* 32 bit tsf time when in starts */
>> +} __packed;
>> +
>> +#define WMI_P2P_NOA_INFO_CHANGED_FLAG		BIT(0)
>> +#define WMI_P2P_NOA_INFO_INDEX			GENMASK(15, 8)
>> +#define WMI_P2P_NOA_INFO_OPP_PS			BIT(16)
>> +#define WMI_P2P_NOA_INFO_CTWIN_TU		GENMASK(23, 17)
>> +#define WMI_P2P_NOA_INFO_DESC_NUM		GENMASK(31, 24)
>> +
>> +struct ath11k_wmi_p2p_noa_info {
>> +	/* Bit 0 - Flag to indicate an update in NOA schedule
>> +	 * Bits 7-1 - Reserved
>> +	 * Bits 15-8 - Index (identifies the instance of NOA sub element)
>> +	 * Bit  16 - Opp PS state of the AP
>> +	 * Bits 23-17 -  Ctwindow in TUs
>> +	 * Bits 31-24 -  Number of NOA descriptors
>> +	 */
>> +	u32 noa_attr;
>> +	struct ath11k_wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
> 
> so firmware always sends the max number of records even if Bits 31-24 -
> Number of NOA descriptors indicates a smaller number?
> 
>> +} __packed;
>> +
>>   #define WMI_BEACON_TX_BUFFER_SIZE	512
>>   
>>   #define WMI_EMA_TMPL_IDX_SHIFT            8
> 
> I'm seeing things today I probably missed in the ath12k review, so let's
> make sure that when this is merged that ath12k si updated as well.
> 
> /jeff



More information about the ath11k mailing list