[PATCH 1/5] wifi: ath11k: rearrange IRQ enable/disable in reset path

[Kalle Valo]

Baochen Qiang <quic_bqiang at quicinc.com> wrote:

> For non WoW suspend/resume, ath11k host powers down whole hardware
> when suspend and powers up it when resume, the code path it goes
> through is very like the ath11k reset logic.
> 
> In order to reuse that logic, rearrange IRQ handling in the reset
> path.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
> 
> Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
> Signed-off-by: Baochen Qiang <quic_bqiang at quicinc.com>

5 patches applied to ath-next branch of ath.git, thanks.

d455e805de70 wifi: ath11k: rearrange IRQ enable/disable in reset path
fbb2a14afe00 wifi: ath11k: remove MHI LOOPBACK channels
5f3288a34878 wifi: ath11k: do not dump SRNG statistics during resume
361c90ed3647 wifi: ath11k: fix warning on DMA ring capabilities event
50556081e09b wifi: ath11k: thermal: don't try to register multiple times

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20240221024725.10057-2-quic_bqiang@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches