[PATCH] wifi: ath11k: initialize eirp_power before use

[Baochen Qiang]

Currently, at the end of ath11k_mac_fill_reg_tpc_info(), the
reg_tpc_info struct is populated, including the following:
	reg_tpc_info->is_psd_power = is_psd_power;
	reg_tpc_info->eirp_power = eirp_power;

Kernel test robot complains on uninitialized symbol:
drivers/net/wireless/ath/ath11k/mac.c:7949
ath11k_mac_fill_reg_tpc_info() error: uninitialized symbol 'eirp_power'.

This is because there are some code paths that never set eirp_power, so
the assignment of reg_tpc_info->eirp_power can come from an
uninitialized variable. Functionally this is OK since the eirp_power
only has meaning when is_psd_power is true, and all code paths which set
is_psd_power to true also set eirp_power. However, to keep the robot
happy, always initialize eirp_power before use.

Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23

Fixes: 92425f788fee ("wifi: ath11k: fill parameters for vdev set tpc power WMI command")
Reported-by: kernel test robot <lkp at intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/
Signed-off-by: Baochen Qiang <quic_bqiang at quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index bbf4d1f4d310..310055843ee9 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -7592,7 +7592,8 @@ void ath11k_mac_fill_reg_tpc_info(struct ath11k *ar,
 	u8 pwr_lvl_idx, num_pwr_levels, pwr_reduction;
 	bool is_psd_power = false, is_tpe_present = false;
 	s8 max_tx_power[IEEE80211_MAX_NUM_PWR_LEVEL],
-		psd_power, tx_power, eirp_power;
+		psd_power, tx_power;
+	s8 eirp_power = 0;
 	u16 start_freq, center_freq;
 
 	chan = ctx->def.chan;

base-commit: d4d13947306ab3c98c84389d9397563b550b71b8
-- 
2.25.1