[PATCH] wifi: ath11k: allow APs combination when dual stations are supported
Yu Zhang (Yuriy)
quic_yuzha at quicinc.com
Tue Dec 3 00:28:45 PST 2024
On 12/3/2024 4:04 PM, Jose Ignacio Tornos Martinez wrote:
> Sorry, but your solution is not working for me.
> We need to be able to setup 2 APs, as it was possible before, and with your
> interface combinations it is not possible either.
> I was trying to create a second interface combination to recover the old
> scenario as well, but I couldn't, that is the reason why I have implemented
> this parameter.
>
> Thanks
>
> Best regards
> Jose Ignacio
>
Which chip do you use?
I can't be sure about your scenario, but based on your description, I
tried it on the 6855 and it works:
sh-5.1# iw dev
phy#0
Interface wlan2
ifindex 6
wdev 0x3
addr 12:03:7f:21:84:11
ssid QSoftAP2
type AP
channel 149 (5745 MHz), width: 20 MHz, center1: 5745 MHz
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt
hashcol tx-bytes tx-packets
0 0 0 0 0 0
0 0 0
Interface wlan1
ifindex 5
wdev 0x2
addr 02:03:7f:21:84:11
ssid QSoftAP1
type AP
channel 36 (5180 MHz), width: 20 MHz, center1: 5180 MHz
txpower 5.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt
hashcol tx-bytes tx-packets
0 0 0 0 0 0
0 0 0
Interface wlan0
ifindex 4
wdev 0x1
addr 00:03:7f:21:84:11
type managed
txpower 18.00 dBm
multicast TXQ:
qsz-byt qsz-pkt flows drops marks overlmt
hashcol tx-bytes tx-packets
0 0 0 0 0 0
0 0 0
More information about the ath11k
mailing list