QCA6390 bluetooth doesn't work after warm boot or disable/reenable
Wren Turkal
wt at penguintechs.org
Sat Apr 6 13:16:53 PDT 2024
Sorry for the double send on the original message. I am still hoping to
get some help. I have added additional info below.
On 4/4/24 12:14 PM, Wren Turkal wrote:
> Hey there ath11k/bluetooth folks,
>
> I am having a pretty major problem with QCA6930 for some time (maybe a
> year or two). I have this bluetooth device:
>
> 72:00.0 Unassigned class [ff00]: Qualcomm Technologies, Inc QCA6390
> Wireless Network Adapter
>
> This device appears to be driven by the ath11k module and others. I hope
> I am pinging the right lists.
>
> I am using Fedora Rawhide. Fully updated yesterday. My uname reports this:
>
> Linux braindead.localdomain
> 6.9.0-0.rc2.20240402git026e680b0a08.24.fc41.x86_64 #1 SMP
> PREEMPT_DYNAMIC Tue Apr 2 17:51:18 UTC 2024 x86_64 GNU/Linux
Updated today. Here's the new uname:
Linux braindead.localdomain
6.9.0-0.rc2.20240405git8cb4a9a82b21.27.fc41.x86_64 #1 SMP
PREEMPT_DYNAMIC Fri Apr 5 16:48:07 UTC 2024 x86_64 GNU/Linux
I also noticed a new version of bluez. Here is the RPM package version:
bluez-5.73-3.fc41.x86_64
> My main bluetooth device is a Logitech MX 3 Mac mouse that uses
> bluetooth. When bluetooth fails, so does the mouse. I have power cycle
> my laptop when that happens. I'd love to help find a fix for this.
>
> The problem is that I cannot disable and re-enable the bluetooth on my
> system. Bluetooth also doesn't work after a warm boot. I have to power
> cycle my laptop to recover bluetooth funcitonality. I have tried the
> following:
>
> * logging into KDE Plasma (bluetooth stops working)
> * logging into GNOME (works on cold boot, fails on warm boot)
I did notice that the mouse seems to work in Plasma until a few sec
after I see the background image appears. I suspect that Plasma is
disabling and reenabling the bluetooth where Gnome does not do that.
> After logging into GNOME during a cold boot, I have also done "systemctl
> restart bluetooth.service". I get these journal logs during the stop;
>
> ➜ bt_kernel_bug cat journal-stop-bluetooth-service.log
> Apr 04 10:14:41 braindead.localdomain NetworkManager[1120]: <info>
> [1712250881.7060] device (F0:5C:77:F2:60:FC): state change: disconnected
> -> unmanaged (reason 'removed', sys-iface-state: 'removed')
> Apr 04 10:14:41 braindead.localdomain systemd[1]: Starting
> systemd-rfkill.service - Load/Save RF Kill Switch Status...
> Apr 04 10:14:41 braindead.localdomain systemd[1]: Started
> systemd-rfkill.service - Load/Save RF Kill Switch Status.
> Apr 04 10:14:41 braindead.localdomain audit[1]: SERVICE_START pid=1
> uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
> Apr 04 10:14:46 braindead.localdomain systemd[1]:
> systemd-rfkill.service: Deactivated successfully.
> Apr 04 10:14:46 braindead.localdomain audit[1]: SERVICE_STOP pid=1 uid=0
> auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
>
> I get these journal logs during start:
>
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: setting
> up ROME/QCA6390
> Apr 04 10:15:05 braindead.localdomain systemd[1]: Starting
> systemd-rfkill.service - Load/Save RF Kill Switch Status...
> Apr 04 10:15:05 braindead.localdomain systemd[1]: Started
> systemd-rfkill.service - Load/Save RF Kill Switch Status.
> Apr 04 10:15:05 braindead.localdomain audit[1]: SERVICE_START pid=1
> uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Product ID :0x00000010
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA SOC
> Version :0x400a0200
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA ROM
> Version :0x00000200
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA Patch
> Version:0x00003ac0
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA
> controller version 0x02000200
> Apr 04 10:15:05 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Downloading qca/htbtfw20.tlv
> Apr 04 10:15:06 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Failed to send TLV segment (-110)
> Apr 04 10:15:06 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Failed to download patch (-110)
> Apr 04 10:15:06 braindead.localdomain kernel: Bluetooth: hci0: Retry BT
> power ON:0
> Apr 04 10:15:08 braindead.localdomain kernel: Bluetooth: hci0: command
> 0xfc00 tx timeout
> Apr 04 10:15:08 braindead.localdomain kernel: Bluetooth: hci0: Reading
> QCA version information failed (-110)
> Apr 04 10:15:08 braindead.localdomain kernel: Bluetooth: hci0: Retry BT
> power ON:1
> Apr 04 10:15:10 braindead.localdomain systemd[1]:
> systemd-rfkill.service: Deactivated successfully.
> Apr 04 10:15:10 braindead.localdomain audit[1]: SERVICE_STOP pid=1 uid=0
> auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
> Apr 04 10:15:10 braindead.localdomain kernel: Bluetooth: hci0: command
> 0xfc00 tx timeout
> Apr 04 10:15:10 braindead.localdomain kernel: Bluetooth: hci0: Reading
> QCA version information failed (-110)
> Apr 04 10:15:10 braindead.localdomain kernel: Bluetooth: hci0: Retry BT
> power ON:2
> Apr 04 10:15:13 braindead.localdomain bluetoothd[986]: Failed to set
> mode: Authentication Failed (0x05)
> Apr 04 10:15:13 braindead.localdomain kernel: Bluetooth: hci0: command
> 0xfc00 tx timeout
> Apr 04 10:15:13 braindead.localdomain kernel: Bluetooth: hci0: Reading
> QCA version information failed (-110)
> Apr 04 10:15:15 braindead.localdomain chronyd[1065]: Selected source
> 204.17.205.8 (2.fedora.pool.ntp.org)
> Apr 04 10:15:22 braindead.localdomain systemd[1687]: Created slice
> background.slice - User Background Tasks Slice.
> Apr 04 10:15:22 braindead.localdomain systemd[1687]: Starting
> systemd-tmpfiles-clean.service - Cleanup of User's Temporary Files and
> Directories...
> Apr 04 10:15:22 braindead.localdomain systemd[1687]: Finished
> systemd-tmpfiles-clean.service - Cleanup of User's Temporary Files and
> Directories.
> Apr 04 10:15:38 braindead.localdomain audit: BPF prog-id=86 op=LOAD
> Apr 04 10:15:38 braindead.localdomain systemd[1]: Starting
> plocate-updatedb.service - Update the plocate database...
> Apr 04 10:15:41 braindead.localdomain systemd[1687]: Started
> vte-spawn-21527424-cb2d-479f-af17-22251e2b37a0.scope - VTE child process
> 5144 launched by gnome-terminal-server process 4668.
> Apr 04 10:15:53 braindead.localdomain systemd[1]:
> plocate-updatedb.service: Deactivated successfully.
> Apr 04 10:15:53 braindead.localdomain systemd[1]: Finished
> plocate-updatedb.service - Update the plocate database.
> Apr 04 10:15:53 braindead.localdomain systemd[1]:
> plocate-updatedb.service: Consumed 6.802s CPU time.
> Apr 04 10:15:53 braindead.localdomain audit[1]: SERVICE_START pid=1
> uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=plocate-updatedb comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
> Apr 04 10:15:53 braindead.localdomain audit[1]: SERVICE_STOP pid=1 uid=0
> auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0
> msg='unit=plocate-updatedb comm="systemd" exe="/usr/lib/systemd/systemd"
> hostname=? addr=? terminal=? res=success'
> Apr 04 10:15:54 braindead.localdomain audit: BPF prog-id=86 op=UNLOAD
> Apr 04 10:16:13 braindead.localdomain baloo_file_extractor[5251]:
> kf.idletime: Could not find any system poller plugin
> Apr 04 10:16:13 braindead.localdomain baloo_file_extractor[5251]:
> qt.core.qobject.connect: QObject::connect(KAbstractIdleTimePoller,
> KIdleTime): invalid nullptr parameter
> Apr 04 10:16:13 braindead.localdomain baloo_file_extractor[5251]:
> qt.core.qobject.connect: QObject::connect(KAbstractIdleTimePoller,
> KIdleTime): invalid nullptr parameter
>
> There's a bunch of errors in those logs starting with these two
> seemingly important lines:
>
> Apr 04 10:15:06 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Failed to send TLV segment (-110)
> Apr 04 10:15:06 braindead.localdomain kernel: Bluetooth: hci0: QCA
> Failed to download patch (-110)
Logs are mostly unchanges when restarting the bluetooth service after a
cold boot with the bluetooth originally working.
> FWIW, I get similar logs after logging into KDE Plasma. I also get
> similar logs after a warm boot.
>
> This appears to be some kind of bug in the initialization of the
> hardware. Is there any additional information I can provide to help
> troubleshoot this problem.
I will also say that the bluetooth appears to work throught a
suspend/resume cycle as long as I don't restart the bluetooth service.
Oh, and my laptop is a Dell 9310 if that helps.
Is there any other info I could collect that might be useful?
I'm pretty new to troubleshooting a problem like this and would be happy
to have any advice anyone might want to share.
Thanks,
wt
--
You're more amazing than you think!
More information about the ath11k
mailing list