[PATCH v6 09/13] wifi: ath11k: fill parameters for vdev set tpc power WMI command

[Jeff Johnson]

On 9/20/2023 1:23 AM, Wen Gong wrote:
> Prepare the parameters which is needed for WMI command WMI_VDEV_SET_TPC_POWER_CMDID.
> 
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
> 
> Signed-off-by: Wen Gong <quic_wgong at quicinc.com>
> ---
>   drivers/net/wireless/ath/ath11k/mac.c | 277 ++++++++++++++++++++++++++
>   drivers/net/wireless/ath/ath11k/mac.h |   3 +
>   2 files changed, 280 insertions(+)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
> index bfb900d98347..f05d66913abd 100644
> --- a/drivers/net/wireless/ath/ath11k/mac.c
> +++ b/drivers/net/wireless/ath/ath11k/mac.c
> @@ -7661,6 +7661,283 @@ static u8 ath11k_mac_get_num_pwr_levels(struct cfg80211_chan_def *chan_def)
>   	}
>   }
>   
> +static u16 ath11k_mac_get_6ghz_start_frequency(struct cfg80211_chan_def *chan_def)
> +{
> +	u16 diff_seq;
> +
> +	/* It is to get the lowest channel number's center frequency of the chan.
> +	 * For example,
> +	 * bandwidth=40 MHz, center frequency is 5965, lowest channel is 1
> +	 * with center frequency 5955, its diff is 5965 - 5955 = 10.
> +	 * bandwidth=80 MHz, center frequency is 5985, lowest channel is 1
> +	 * with center frequency 5955, its diff is 5985 - 5955 = 30.
> +	 * bandwidth=160 MHz, center frequency is 6025, lowest channel is 1
> +	 * with center frequency 5955, its diff is 6025 - 5955 = 70.
> +	 */
> +	switch (chan_def->width) {
> +	case NL80211_CHAN_WIDTH_160:
> +		diff_seq = 70;
> +		break;
> +	case NL80211_CHAN_WIDTH_80:
> +	case NL80211_CHAN_WIDTH_80P80:
> +		diff_seq = 30;
> +		break;
> +	case NL80211_CHAN_WIDTH_40:
> +		diff_seq = 10;
> +		break;
> +	default:
> +		diff_seq = 0;
> +	}
> +
> +	return chan_def->center_freq1 - diff_seq;
> +}
> +
> +static u16 ath11k_mac_get_seg_freq(struct cfg80211_chan_def *chan_def,
> +				   u16 start_seq, u8 seq)
> +{
> +	u16 seg_seq;
> +
> +	/* It is to get the center frequency of the specific bandwidth.
> +	 * start_seq means the lowest channel number's center frequency.
> +	 * seq 0/1/2/3 means 20 MHz/40 MHz/80 MHz/160 MHz&80P80.
> +	 * For example,
> +	 * lowest channel is 1, its center frequency 5955,
> +	 * center frequency is 5955 when bandwidth=20 MHz, its diff is 5955 - 5955 = 0.
> +	 * lowest channel is 1, its center frequency 5955,
> +	 * center frequency is 5965 when bandwidth=40 MHz, its diff is 5965 - 5955 = 10.
> +	 * lowest channel is 1, its center frequency 5955,
> +	 * center frequency is 5985 when bandwidth=80 MHz, its diff is 5985 - 5955 = 30.
> +	 * lowest channel is 1, its center frequency 5955,
> +	 * center frequency is 6025 when bandwidth=160 MHz, its diff is 6025 - 5955 = 70.
> +	 */
> +	if (chan_def->width == NL80211_CHAN_WIDTH_80P80 && seq == 3)
> +		return chan_def->center_freq2;
> +
> +	seg_seq = 10 * (BIT(seq) - 1);
> +	return seg_seq + start_seq;
> +}

The above two functions are driver agnostic. Will other drivers need 
this as well, and if so, should these go into core wireless?