[PATCH 2/3] wifi: ath11k: fix CAC running state during virtual interface start

[Aditya Kumar Singh]

On 6/7/23 18:16, Aditya Kumar Singh wrote:
> Currently channel definition's primary channel's DFS CAC time
> as well as primary channel's state i.e usable are used to set
> the CAC_RUNNING flag for the ath11k radio structure. However,
> this is wrong since certain channel definition are possbile
> where primary channel may not be a DFS channel but, secondary
> channel is a DFS channel. For example - channel 36 with 160 MHz
> bandwidth.
> In such cases, the flag will not be set which is wrong.
> 
> Fix this issue by using cfg80211_chandef_dfs_usable() function
> from cfg80211 which return trues if at least one channel is in
> usable state.
> 
> While at it, modify the CAC running debug log message to print
> the CAC time as well in milli-seconds.
> 
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> 
> Signed-off-by: Aditya Kumar Singh <quic_adisi at quicinc.com>
Hi Kalle,

The upstream dependency got merged today. I have sent [v2] of this 
series which was just rebased on latest ToT and the [PATCH v2 1/3] got 
merged. With this, [PATCH v2 2/3] and [PATCH v2 3/3] are unblocked now.

- Aditya