[PATCH] wifi: ath11k: call ath11k_mac_fils_discovery() without condition

[Aloka Dixit]

Mac80211 does not set flags BSS_CHANGED_FILS_DISCOVERY and
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP if there are no updates to
FILS discovery and unsolicited broadcast probe response transmission
configurations respectively. This results in the transmissions getting
stopped during BSS change operations which do not include these
attributes. Remove the checks for the flags and always send the existing
configuration to firmware.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Aloka Dixit <quic_alokad at quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mac.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 20b04723daec..5b3d31f53ecf 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3731,9 +3731,7 @@ static void ath11k_mac_op_bss_info_changed(struct ieee80211_hw *hw,
 				    arvif->vdev_id, ret);
 	}
 
-	if (changed & BSS_CHANGED_FILS_DISCOVERY ||
-	    changed & BSS_CHANGED_UNSOL_BCAST_PROBE_RESP)
-		ath11k_mac_fils_discovery(arvif, info);
+	ath11k_mac_fils_discovery(arvif, info);
 
 	if (changed & BSS_CHANGED_ARP_FILTER) {
 		ipv4_cnt = min(vif->cfg.arp_addr_cnt, ATH11K_IPV4_MAX_COUNT);

base-commit: 140accd3f29eee6507f8a51bc38e85c119aedf14
-- 
2.39.0