[PATCH RFC 4/8] wifi: ath11k: remove MHI LOOPBACK channels

[Kalle Valo]

From: Baochen Qiang <quic_bqiang at quicinc.com>

There is no driver to match these two channels, so
remove them. This fixes warnings from MHI subsystem during suspend:

mhi mhi0_LOOPBACK: 1: Failed to reset channel, still resetting
mhi mhi0_LOOPBACK: 0: Failed to reset channel, still resetting

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30

Signed-off-by: Baochen Qiang <quic_bqiang at quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo at quicinc.com>
---
 drivers/net/wireless/ath/ath11k/mhi.c | 28 ---------------------------
 1 file changed, 28 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/mhi.c b/drivers/net/wireless/ath/ath11k/mhi.c
index afeabd6ecc67..d4fe1d1c86e4 100644
--- a/drivers/net/wireless/ath/ath11k/mhi.c
+++ b/drivers/net/wireless/ath/ath11k/mhi.c
@@ -21,34 +21,6 @@
 #define RDDM_DUMP_SIZE	0x420000
 
 static struct mhi_channel_config ath11k_mhi_channels_qca6390[] = {
-	{
-		.num = 0,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 0,
-		.dir = DMA_TO_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
-	{
-		.num = 1,
-		.name = "LOOPBACK",
-		.num_elements = 32,
-		.event_ring = 0,
-		.dir = DMA_FROM_DEVICE,
-		.ee_mask = 0x4,
-		.pollcfg = 0,
-		.doorbell = MHI_DB_BRST_DISABLE,
-		.lpm_notify = false,
-		.offload_channel = false,
-		.doorbell_mode_switch = false,
-		.auto_queue = false,
-	},
 	{
 		.num = 20,
 		.name = "IPCR",
-- 
2.39.2