[PATCH 0/2] ath11k: factory test mode support

Mon Feb 13 05:08:52 PST 2023

Device is booted in factory test mode to calibrate the board.
The commands are sent from a userspace application, which is
sent to firmware using wmi commands. Firmware will send the
response back to the application which stores the calibration
data in caldata.bin file. This file will be loaded when the
device boots up normally next time.

Govindaraj Saminathan (1):
  wifi: ath11k: factory test mode support

Sowmiya Sree Elavalagan (1):
  wifi: ath11k: Allow ath11k to boot without caldata in ftm mode

 drivers/net/wireless/ath/ath11k/ahb.c        |   3 +-
 drivers/net/wireless/ath/ath11k/core.c       |  20 +-
 drivers/net/wireless/ath/ath11k/core.h       |  14 +-
 drivers/net/wireless/ath/ath11k/debug.h      |   2 +
 drivers/net/wireless/ath/ath11k/mac.c        |  13 +-
 drivers/net/wireless/ath/ath11k/pci.c        |   3 +-
 drivers/net/wireless/ath/ath11k/qmi.c        |  10 +-
 drivers/net/wireless/ath/ath11k/testmode.c   | 323 ++++++++++++++++---
 drivers/net/wireless/ath/ath11k/testmode.h   |  21 +-
 drivers/net/wireless/ath/ath11k/testmode_i.h |  19 ++
 drivers/net/wireless/ath/ath11k/wmi.c        |  40 ++-
 drivers/net/wireless/ath/ath11k/wmi.h        |  20 ++
 drivers/net/wireless/ath/ath11k/wow.c        |   3 +-
 13 files changed, 427 insertions(+), 64 deletions(-)

base-commit: ddd8e84e007263f3aa8993f32a3dd4dc8ec0876a
-- 
2.17.1