[PATCH v2 0/4] ath11k: factory test mode support

[Raj Kumar Bhagat]

On 4/20/2023 5:06 PM, Raj Kumar Bhagat wrote:
> Device is booted in factory test mode to calibrate the board.
> The commands are sent from a userspace application, which is
> sent to firmware using wmi commands. Firmware will send the
> response back to the application which stores the calibration
> data in caldata.bin file. This file will be loaded when the
> device boots up normally next time.
> 
> Govindaraj Saminathan (3):
>   wifi: ath11k: remove unused function ath11k_tm_event_wmi
>   wifi: ath11k: optimize ath11k_tm_cmd_get_version
>   wifi: ath11k: factory test mode support
> 
> Sowmiya Sree Elavalagan (1):
>   wifi: ath11k: Allow ath11k to boot without caldata in ftm mode
> 
> ---
> v2:
> - added separate patch for removal of ath11k_tm_event_wmi()
> - added separate patch for changes in ath11k_tm_cmd_get_version()
> - removed unused cmd and updated documentation for enum ath11k_tm_cmd
> - changed warning print to debug print
> ---
> 
>  drivers/net/wireless/ath/ath11k/ahb.c        |   3 +-
>  drivers/net/wireless/ath/ath11k/core.c       |  20 +-
>  drivers/net/wireless/ath/ath11k/core.h       |  15 +-
>  drivers/net/wireless/ath/ath11k/mac.c        |  13 +-
>  drivers/net/wireless/ath/ath11k/pci.c        |   3 +-
>  drivers/net/wireless/ath/ath11k/qmi.c        |  10 +-
>  drivers/net/wireless/ath/ath11k/testmode.c   | 320 ++++++++++++++++---
>  drivers/net/wireless/ath/ath11k/testmode.h   |  20 +-
>  drivers/net/wireless/ath/ath11k/testmode_i.h |  16 +
>  drivers/net/wireless/ath/ath11k/wmi.c        |  40 ++-
>  drivers/net/wireless/ath/ath11k/wmi.h        |  20 ++
>  drivers/net/wireless/ath/ath11k/wow.c        |   3 +-
>  12 files changed, 419 insertions(+), 64 deletions(-)
> 
> 
> base-commit: 12f167f02a1abe2c8817496a902de00758285b92

Please ignore this patch series. Tested-on tag is missing for patches 1/4 and
2/4. Will send v3 with correct Tested-on tag.

Thanks,
Raj