QCA9074 problem on rk3568

[Doug Brewer]

Hi,

I tried to install linux kernel 6.3-rc7 on my rk3568 evb.  It seems there's
a problem about MHI:

[   11.340558] ath11k_pci 0002:01:00.0: BAR 0: assigned [mem 0x380000000-0x3801f
ffff 64bit]
[   11.341399] ath11k_pci 0002:01:00.0: enabling device (0000 -> 0002)
[   11.422849] ath11k_pci 0002:01:00.0: MSI vectors: 16
[   11.423335] ath11k_pci 0002:01:00.0: qcn9074 hw1.0
[   11.660846] mhi mhi0: Requested to power ON
[   11.661271] mhi mhi0: Power on setup success
[   31.716289] mhi mhi0: MHI did not load image over BHI, ret: -5
[   60.551942] mhi mhi0: Device failed to enter READY state
[   60.552544] mhi mhi0: Error moving from PM state: Firmware Download Error to:
DISABLE
[   60.553376] ath11k_pci 0002:01:00.0: failed to power up mhi: -110
[   60.553972] ath11k_pci 0002:01:00.0: failed to start mhi: -110
[   60.554532] ath11k_pci 0002:01:00.0: failed to power up :-110
[   60.567907] ath11k_pci 0002:01:00.0: failed to create soc core:
-110
[   60.568488] ath11k_pci 0002:01:00.0: failed to init core: -110

Any idea how to fix it?  Thanks.

- Doug