[PATCH] ath11k: Fix QCN9074 firmware boot on x86

[Tyler J. Stachecki]

The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).

The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).

Since f6f92968e1e5, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.

Signed-off-by: Tyler J. Stachecki <stachecki.tyler at gmail.com>
---
 drivers/net/wireless/ath/ath11k/qmi.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 2ec56a34fa81..0909d53cefeb 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -27,7 +27,7 @@
 #define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01	52
 #define ATH11K_QMI_CALDB_SIZE			0x480000
 #define ATH11K_QMI_BDF_EXT_STR_LENGTH		0x20
-#define ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT	3
+#define ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT	5
 
 #define QMI_WLFW_REQUEST_MEM_IND_V01		0x0035
 #define QMI_WLFW_FW_MEM_READY_IND_V01		0x0037
-- 
2.30.2