[PATCH v2 3/4] ath11k: Enable low power mode when WLAN is not active
Manikanta Pubbisetty
quic_mpubbise at quicinc.com
Mon Nov 21 02:56:11 PST 2022
On 9/2/2022 6:55 PM, Manikanta Pubbisetty wrote:
> On 9/2/2022 6:48 PM, Kalle Valo wrote:
>> Manikanta Pubbisetty <quic_mpubbise at quicinc.com> writes:
>>
>>> On 8/31/2022 1:31 PM, Kalle Valo wrote:
>>>
>>>> With this patch 3 my regression tests on WCN6855 panic:
>>>>
>>>> [ 109.009427] rmmod ath11k_pci
>>>> [ 109.437120] kworker/dying (1560) used greatest stack depth: 24704
>>>> bytes left
>>>> [ 109.446051] general protection fault, probably for non-canonical
>>>> address 0xdffffc000000003e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
>>>> KASAN
>>>> [ 109.446133] KASAN: null-ptr-deref in range
>>>> [0x00000000000001f0-0x00000000000001f7]
>>>> [ 109.446211] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
>>>> 6.0.0-rc2-wt-ath+ #683
>>>> [ 109.446315] Hardware name: Intel(R) Client Systems
>>>> NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339
>>>> 05/28/2021
>>>> [ 109.446393] RIP: 0010:ath11k_dp_process_rxdma_err+0x1c8/0x810
>>>> [ath11k]
>>>> [ 109.446486] Code: d2 48 63 d8 48 8b 4c 24 38 48 8d 04 5b 48 c1 e0
>>>> 04 48 8d bc 01 f4 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
>>>> c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2
>>>> 0f 85 aa
>>>> [ 109.446557] RSP: 0018:ffffc90000007b90 EFLAGS: 00010203
>>>> [ 109.446619] RAX: dffffc0000000000 RBX: 0000000000000000 RCX:
>>>> 0000000000000000
>>>> [ 109.446677] RDX: 000000000000003e RSI: 0000000000000000 RDI:
>>>> 00000000000001f4
>>>> [ 109.446734] RBP: 0000000000000000 R08: ffff88814c0e1470 R09:
>>>> ffff88814c0f6678
>>>> [ 109.446792] R10: dffffc0000000000 R11: ffffed102981ecd0 R12:
>>>> 0000000000000000
>>>> [ 109.446903] R13: 0000000000000040 R14: 1ffff92000000f81 R15:
>>>> ffff88814c0e0000
>>>> [ 109.446961] FS: 0000000000000000(0000) GS:ffff888233600000(0000)
>>>> knlGS:0000000000000000
>>>> [ 109.447020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> [ 109.447080] CR2: 000055570fe84cc8 CR3: 0000000152540006 CR4:
>>>> 00000000003706f0
>>>> [ 109.447136] Call Trace:
>>>> [ 109.447194] <IRQ>
>>>> [ 109.447257] ? ath11k_dp_process_reo_status+0x3ce/0x560 [ath11k]
>>>> [ 109.447349] ? ath11k_dp_rx_process_wbm_err+0x17d0/0x17d0 [ath11k]
>>>> [ 109.447442] ath11k_dp_service_srng+0x358/0xab0 [ath11k]
>>>> [ 109.447536] ath11k_pcic_ext_grp_napi_poll+0x40/0x1d0 [ath11k]
>>>> [ 109.447628] __napi_poll.constprop.0+0x97/0x350
>>>> [ 109.447690] net_rx_action+0x7bf/0xbb0
>>>> [ 109.447749] ? __napi_poll.constprop.0+0x350/0x350
>>>> [ 109.447831] ? ktime_get+0x101/0x2f0
>>>> [ 109.447911] __do_softirq+0x1ca/0x897
>>>> [ 109.447989] __irq_exit_rcu+0xdb/0x180
>>>> [ 109.448049] irq_exit_rcu+0x5/0x20
>>>> [ 109.448109] sysvec_apic_timer_interrupt+0x8a/0xb0
>>>> [ 109.448168] </IRQ>
>>>> [ 109.448226] <TASK>
>>>> [ 109.448284] asm_sysvec_apic_timer_interrupt+0x16/0x20
>>>> [ 109.448343] RIP: 0010:cpuidle_enter_state+0x1ef/0x9a0
>>>> [ 109.448407] Code: 00 00 8b 73 04 bf ff ff ff ff e8 8c f0 ff ff 31
>>>> ff e8 75 16 47 fe 80 7c 24 08 00 0f 85 a1 01 00 00 e8 75 7d 6a fe fb
>>>> 45 85 f6 <0f> 88 6f 02 00 00 4d 63 ee 4b 8d 44 6d 00 49 8d 44 85 00
>>>> 48 8d 7c
>>>> [ 109.448477] RSP: 0018:ffffffffb9407db8 EFLAGS: 00000202
>>>> [ 109.448540] RAX: 0000000000124987 RBX: ffff888114966400 RCX:
>>>> 1ffffffff738a3e1
>>>> [ 109.448600] RDX: 0000000000000000 RSI: ffffffffb8a71bc0 RDI:
>>>> ffffffffb8bec9c0
>>>> [ 109.448659] RBP: ffffffffb986efa0 R08: 0000000000000001 R09:
>>>> ffffffffb9c54717
>>>> [ 109.448715] R10: fffffbfff738a8e2 R11: 00000000000002ec R12:
>>>> 000000197b7a6a19
>>>> [ 109.448774] R13: 0000000000000002 R14: 0000000000000002 R15:
>>>> ffff888114966404
>>>> [ 109.448871] ? cpuidle_enter_state+0x1eb/0x9a0
>>>> [ 109.448947] ? finish_task_switch.isra.0+0x120/0x870
>>>> [ 109.449006] cpuidle_enter+0x45/0xa0
>>>> [ 109.449065] cpuidle_idle_call+0x274/0x3f0
>>>> [ 109.449125] ? arch_cpu_idle_exit+0x30/0x30
>>>> [ 109.449187] ? tsc_verify_tsc_adjust+0x86/0x2d0
>>>> [ 109.449247] ? lockdep_hardirqs_off+0x90/0xd0
>>>> [ 109.449306] do_idle+0xe0/0x140
>>>> [ 109.449363] cpu_startup_entry+0x14/0x20
>>>> [ 109.449423] rest_init+0x135/0x1e0
>>>> [ 109.449482] arch_call_rest_init+0xa/0xb
>>>> [ 109.449542] start_kernel+0x391/0x3af
>>>> [ 109.449606] secondary_startup_64_no_verify+0xce/0xdb
>>>> [ 109.449671] </TASK>
>>>> [ 109.449729] Modules linked in: ath11k_pci(-) ath11k mac80211
>>>> libarc4 cfg80211 qmi_helpers qrtr_mhi mhi qrtr nvme nvme_core
>>>> [ 109.449846] ---[ end trace 0000000000000000 ]---
>>>> [ 109.449927] RIP: 0010:ath11k_dp_process_rxdma_err+0x1c8/0x810
>>>> [ath11k]
>>>> [ 109.450073] Code: d2 48 63 d8 48 8b 4c 24 38 48 8d 04 5b 48 c1 e0
>>>> 04 48 8d bc 01 f4 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48
>>>> c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2
>>>> 0f 85 aa
>>>> [ 109.450147] RSP: 0018:ffffc90000007b90 EFLAGS: 00010203
>>>> [ 109.450212] RAX: dffffc0000000000 RBX: 0000000000000000 RCX:
>>>> 0000000000000000
>>>> [ 109.450275] RDX: 000000000000003e RSI: 0000000000000000 RDI:
>>>> 00000000000001f4
>>>> [ 109.450337] RBP: 0000000000000000 R08: ffff88814c0e1470 R09:
>>>> ffff88814c0f6678
>>>> [ 109.450401] R10: dffffc0000000000 R11: ffffed102981ecd0 R12:
>>>> 0000000000000000
>>>> [ 109.450465] R13: 0000000000000040 R14: 1ffff92000000f81 R15:
>>>> ffff88814c0e0000
>>>> [ 109.450531] FS: 0000000000000000(0000) GS:ffff888233600000(0000)
>>>> knlGS:0000000000000000
>>>> [ 109.450595] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>>>> [ 109.450661] CR2: 000055570fe84cc8 CR3: 0000000152540006 CR4:
>>>> 00000000003706f0
>>>> [ 109.450723] Kernel panic - not syncing: Fatal exception in interrupt
>>>> [ 109.450794] Kernel Offset: 0x34e00000 from 0xffffffff81000000
>>>> (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
>>>> [ 109.450837] Rebooting in 10 seconds..
>>>
>>> Thanks for the report. From the logs, I see the system crashed during
>>> rmmod ath11k_pci. I have run rmmod & insmod tests several times on
>>> WCN6855 before sending the revised version. Probably some tests before
>>> rmmod would have led to this crash. Could you please let me know what
>>> tests does the regression suite covers? I'll try repro the bug.
>>
>> This is early in the tests, IIRC there was only insmod followed by
>> rmmod. Do you have KASAN etc enabled?
>>
>
> I see. I do not have KASAN enabled. Let me try enabling it.
>
Hi Kalle,
I have been trying to reproduce the above issue on WCN6855 for several
weeks now with KASAN, UBSAN, LOCKDEBUG etc enabled but could not
reproduce this issue. During this long exercise, I have uncovered other
issues and fixed them but I could not reproduce the above signature.
Not sure if there is any particular sequence to trigger the above crash
or it could be that it is an existing one that came up while testing
this series.
I will send V3 patch for review which fixes other issues in the patch
set. I'm in need of your help to test this series in your setup and see
if the above issue is still occurring.
Thanks,
Manikanta
More information about the ath11k
mailing list