ath11k-firmware: QCA6390 hw2.0: add RB5-specific BDF

[Dmitry Baryshkov]

Hi,

On Fri, 18 Feb 2022 at 08:15, Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
> We'd like to ask for inclusion for the board file for Qualcomm Robotics
> RB5 Development Kit.
>
> Following the questions from the ath10k wiki page:

A gracious question. I have followed the procedure described in the
ath10k wiki, receiving no response in the past month. Is something
wrong with the request?

We'd also like to submit several other board files:
 - for the RB3 board (WCN3990, hw 1.0)
 - for the Dragonboard 820c (QCA6174, hw 3.0)

Do they stand a chance to be accepted?

>
> * description for what hardware this is
>   - It an QRB5165 (a variant of SM8250) based board.
>   - It uses qca6391 chip as a WiFi and BT radio
>
> * origin of the board file
>   - It comes from the BSP package distributed by Linaro
> (http://releases.linaro.org/96boards/rb5/qualcomm/firmware/RB5_firmware_20210901-v6.zip)
>
> * ids to be used with the board file
>   - bus=pci,qmi-chip-id=0,qmi-board-id=4
>
> * md5sum of each new board file to add
>
> $ md5sum *
> ac812072da8de6bd4de257cf5bb870c7  bus=pci,qmi-chip-id=0,qmi-board-id=4.bin
> $ sha256sum *
> 8cc579b1f8b874e64a8518d7eb6a702aa7bab65744261f0feb1671e5436c5e55
> bus=pci,qmi-chip-id=0,qmi-board-id=4.bin
>
> --
> With best wishes
> Dmitry



-- 
With best wishes
Dmitry