[PATCH 06/11] ath11k: add static window support for register access

[Hamdi Issam]

Hello,

I was trying to read values of timers from some offsets on the QCN9074, 
but I get every time an invalid values (0xffffffff):
This is example of my code:

#define QCN9000_WLAON_GLOBAL_COUNTER_CTRL3      0x1F80118
#define QCN9000_WLAON_GLOBAL_COUNTER_CTRL4      0x1F8011C
#define QCN9000_WLAON_GLOBAL_COUNTER_CTRL5      0x1F80120

#define QCN9000_TIME_SYNC_ENABLE                0x80000000
#define QCN9000_TIME_SYNC_CLEAR                 0x0
.
.
.
ath11k_pci_write32(ab, QCN9000_WLAON_GLOBAL_COUNTER_CTRL5, 
QCN9000_TIME_SYNC_CLEAR);
ath11k_pci_write32(ab, QCN9000_WLAON_GLOBAL_COUNTER_CTRL5, 
QCN9000_TIME_SYNC_ENABLE);
low = ath11k_pci_read32(ab, QCN9000_WLAON_GLOBAL_COUNTER_CTRL3);
high = ath11k_pci_read32(ab, QCN9000_WLAON_GLOBAL_COUNTER_CTRL4);
.
.

The low and the high parameters always equal to "0xffffffff".

When I made some debugging. I found that the issue is related to 
"static_window_map" developed in the commit 
"480a73610c95511e42fb7d0359b523f66883e51a: ath11k: add static window 
support for register access" and enabled for QCN9074 in this commit 
"4e80946197a83a6115e308334618449b77696d6a: ath11k: add qcn9074 pci 
device support".
When I disabled the "static_window_map" 
(ab->bus_params.static_window_map = false;) for QCN9074, in that case I 
was able to get the correct values.
So it seems that there's an issue of reading some reg when 
static_window_map is enabled.
I need your help to solve this issue.

Regards,
Issam