[PATCH] ath11k: Fix incorrect debug_mask mappings

[Manikanta Pubbisetty]

Currently a couple of debug_mask entries are mapped to the same value,
this could enable unintended driver logging. If enabling DP_TX logs was
the intention, then this could also enable PCI logs flooding the dmesg
buffer or vice versa. Fix this by correctly assigning the debug masks.

Found during code review.

Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1

Fixes: aa2092a9bab3f ("ath11k: add raw mode and software crypto support")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise at quicinc.com>
---
 drivers/net/wireless/ath/ath11k/debug.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/debug.h b/drivers/net/wireless/ath/ath11k/debug.h
index fbbd5fe02aa8..91545640c47b 100644
--- a/drivers/net/wireless/ath/ath11k/debug.h
+++ b/drivers/net/wireless/ath/ath11k/debug.h
@@ -23,8 +23,8 @@ enum ath11k_debug_mask {
 	ATH11K_DBG_TESTMODE	= 0x00000400,
 	ATH11k_DBG_HAL		= 0x00000800,
 	ATH11K_DBG_PCI		= 0x00001000,
-	ATH11K_DBG_DP_TX	= 0x00001000,
-	ATH11K_DBG_DP_RX	= 0x00002000,
+	ATH11K_DBG_DP_TX	= 0x00002000,
+	ATH11K_DBG_DP_RX	= 0x00004000,
 	ATH11K_DBG_ANY		= 0xffffffff,
 };
 
-- 
2.35.1