WCN6855 issues with latest linux-firmware
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Wed Jun 1 05:40:31 PDT 2022
Hi,
On Thu, 12 May 2022 at 17:31, Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
>
> Hi,
>
> The wcn6855 WiFi chip stopped working for me after an update to the
> latest linux-firmware (Linux 5.18-rc2). I can reproduce it with both
> hw2.0 and hw2.1 chips.
>
> Here is the set of kernel messages I'm getting from ath11k_pci driver:
>
> [ 4.422391] ath11k_pci 0000:01:00.0: Adding to iommu group 3
> [ 4.429571] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem
> 0x60400000-0x605fffff 64bit]
> [ 4.437857] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 4.445323] ath11k_pci 0000:01:00.0: MSI vectors: 1
> [ 4.450375] ath11k_pci 0000:01:00.0: wcn6855 hw2.0
> [ 5.378488] ath11k_pci 0000:01:00.0: chip_id 0x2 chip_family 0xb
> board_id 0x8c soc_id 0x400c0200
> [ 5.392898] ath11k_pci 0000:01:00.0: fw_version 0x110f0c35
> fw_build_timestamp 2022-03-30 09:05 fw_build_id
> QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.7
> [ 5.420648] ath11k_pci 0000:01:00.0: failed to fetch board data for
> bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=140
> from ath11k/WCN6855/hw2.0/board-2.bin
> [ 15.686398] ath11k_pci 0000:01:00.0: failed to wait board file
> download request: -110
> [ 15.694530] ath11k_pci 0000:01:00.0: qmi failed to load bdf file
> [ 15.700784] ath11k_pci 0000:01:00.0: failed to load board data file: -110
>
>
> With the earlier firmware from [1] I'm getting the following trace (and
> WiFi device probes). Interestingly enough the chip_id differs between
> these firmware versions.
>
> [ 4.352661] ath11k_pci 0000:01:00.0: Adding to iommu group 3
> [ 4.359192] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem
> 0x60400000-0x605fffff 64bit]
> [ 4.367466] ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
> [ 4.374916] ath11k_pci 0000:01:00.0: MSI vectors: 1
> [ 4.379963] ath11k_pci 0000:01:00.0: wcn6855 hw2.0
> [ 5.273930] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb
> board_id 0x8c soc_id 0x400c0200
> [ 5.286020] ath11k_pci 0000:01:00.0: fw_version 0x110406b8
> fw_build_timestamp 2021-01-08 06:14 fw_build_id
> QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
> [ 5.312464] ath11k_pci 0000:01:00.0: failed to fetch board data for
> bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=0,qmi-board-id=140
> from ath11k/WCN6855/hw2.0/board-2.bin
> [ 5.384315] ath11k_pci 0000:01:00.0: leaving PCI ASPM disabled to
> avoid MHI M2 problems
>
>
>
> [1]
> https://chromium.googlesource.com/chromiumos/third_party/linux-firmware/+/d233ddd89abe06448070471963a58c0a7da81d79/ath11k/WCN6855/hw2.0
>
>
> --
> With best wishes
> Dmitry
I have tested the latest firmware from linux-firmware and it still
fails to send the bdf file request:
[ 3.740702] ath11k_pci 0000:01:00.0: chip_id 0x2 chip_family 0xb
board_id 0xa7 soc_id 0x400c0210
[ 3.752952] ath11k_pci 0000:01:00.0: fw_version 0x11090c35
fw_build_timestamp 2022-04-18 20:23 fw_build_id
QC_IMAGE_VERSION_STRING=WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.9
[ 3.760674] ath11k_pci 0000:01:00.0: failed to fetch board data for
bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=0108,qmi-chip-id=2,qmi-board-id=167
from ath11k/WCN6855/hw2.1/board-2.bin
[....]
[ 13.843957] ath11k_pci 0000:01:00.0: failed to wait board file
download request: -110
^^^^^^^^^^^^^^^^^^^^^^
[ 13.852094] ath11k_pci 0000:01:00.0: qmi failed to load bdf file
[ 13.858322] ath11k_pci 0000:01:00.0: failed to load board data file: -110
--
With best wishes
Dmitry
More information about the ath11k
mailing list