[PATCH v5 0/5] ath11k: add feature for device recovery

[Wen Gong]

Currently recovery is work success for QCA6390/WCN6855 without the RDDM dump feature,
because patch "ath11k: configure RDDM size to mhi for recovery by firmware"
added in v5.

v5:
    1. rebased to ath.git ath-202202030905
    2. change a few commit message
    3. fix count set sequence of ath11k_core_reset in "ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base"
    4. add patch "ath11k: configure RDDM size to mhi for recovery by firmware" to support RDDM
    5. move destroy_workqueue(ab->workqueue_aux) from ath11k_pci_remove() to ath11k_core_free()

v4: add patch "ath11k: fix invalid m3 buffer address"
    recovery will fail when download firmware without this patch

v3: remove time_left set but not used in
    "ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base"

v2: s/initilized/initialized in commit log of patch
    "ath11k: add synchronization operation between reconfigure of mac80211 and ath11k_base"

Add support for device recovery.

Carl Huang (1):
  ath11k: fix invalid m3 buffer address

Wen Gong (4):
  ath11k: add ath11k_qmi_free_resource() for recovery
  ath11k: configure RDDM size to mhi for recovery by firmware
  ath11k: add support for device recovery for QCA6390/WCN6855
  ath11k: add synchronization operation between reconfigure of mac80211
    and ath11k_base

 drivers/net/wireless/ath/ath11k/core.c | 121 +++++++++++++++++++++++--
 drivers/net/wireless/ath/ath11k/core.h |  18 ++++
 drivers/net/wireless/ath/ath11k/mac.c  |  40 ++++++++
 drivers/net/wireless/ath/ath11k/mhi.c  |  35 +++++++
 drivers/net/wireless/ath/ath11k/qmi.c  |   6 ++
 drivers/net/wireless/ath/ath11k/qmi.h  |   1 +
 6 files changed, 213 insertions(+), 8 deletions(-)


base-commit: 76680d49b5e0e661bc4abcdaf13fb7e124b4ca08
-- 
2.31.1