[PATCH 0/2] Update the channel list if the change in channel flags

[Youghandhar Chintala (Temp)]

On 12/22/2022 5:35 PM, Youghandhar Chintala wrote:
> There are connection failures in hidden SSID case when the device is with
> default reg domain WW.
> For WW reg domain most of the 5 GHz channels are passive. When device
> listens to the beacon on that channel, the driver is updating its channel
> flag but firmware is not aware of it and firmware is not sending probes
> on that channels.
> Due to this, we are seeing connection failures when the device is tries to
> connect with hidden SSID AP.
> Whenever the driver detects a channel flag change, send the updated channel
> list command to the firmware.
>
> Youghandhae Chintala (2):
>    wifi: cfg80211: Add beacon hint notifier support
>    wifi: ath10k: update the channel list if change in channel flags.
>
>   drivers/net/wireless/ath/ath10k/mac.c | 11 +++++++++++
>   include/net/cfg80211.h                |  2 ++
>   net/wireless/reg.c                    |  5 ++++-
>   3 files changed, 17 insertions(+), 1 deletion(-)

Hi All,

My bad. Wrong list added. Please ignore this series. I will resend to 
right list.

Regards,

Youghandhar