[PATCH] ath11k: Add support to connect to non-transmit MBSSID profiles

[Kalle Valo]

Manikanta Pubbisetty <quic_mpubbise at quicinc.com> wrote:

> Add support to connect to a non-transmit MBSSID AP profile.
> 
> Non-transmit MBSSID profile parameters are passed to the firmware
> via WMI VDEV UP command and this helps firmware to track MBSSID
> profile within the multi-BSS beacon and report beacon loss if
> any.
> 
> WCN6750, QCA6390 & WCN6855 firmwares have the support and hence
> enable the support on these hardwares.
> 
> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
> 
> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise at quicinc.com>

Failed to apply. Again please use --base.

error: patch failed: drivers/net/wireless/ath/ath11k/core.c:111
error: drivers/net/wireless/ath/ath11k/core.c: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath11k/hw.h:205
error: drivers/net/wireless/ath/ath11k/hw.h: patch does not apply
stg import: Diff does not apply cleanly

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220720134622.15293-1-quic_mpubbise@quicinc.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches