[PATCH v6 4/9] ath11k: Add register access logic for WCN6750

[Manikanta Pubbisetty]

On 4/27/2022 5:55 PM, Kalle Valo wrote:
> Manikanta Pubbisetty <quic_mpubbise at quicinc.com> writes:
> 
>> WCN6750 uses static window mapping to access the HW registers.
>> Unlike QCN9074 which uses 2nd window for CE and 3rd window
>> for UMAC register accesses, WCN6750 uses 1st window for UMAC
>> and 2nd window for CE registers.
>>
>> Code is refactored so that WCN6750 can use the existing
>> ath11k_pci_read/write() APIs for accessing the registers.
>>
>> Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
>> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
>> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
>> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
>>
>> Signed-off-by: Manikanta Pubbisetty <quic_mpubbise at quicinc.com>
>> ---
>>   drivers/net/wireless/ath/ath11k/ahb.c  |  6 +++
>>   drivers/net/wireless/ath/ath11k/core.h |  2 +
>>   drivers/net/wireless/ath/ath11k/pci.c  | 34 ++++++++++++++--
>>   drivers/net/wireless/ath/ath11k/pcic.c | 54 +++++++++-----------------
>>   4 files changed, 58 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
>> index cfdd415f0203..fa12e50f32f4 100644
>> --- a/drivers/net/wireless/ath/ath11k/ahb.c
>> +++ b/drivers/net/wireless/ath/ath11k/ahb.c
>> @@ -34,7 +34,10 @@ static const struct ath11k_bus_params ath11k_ahb_bus_params = {
>>   	.m3_fw_support = false,
>>   	.fixed_bdf_addr = true,
>>   	.fixed_mem_region = true,
>> +	.static_window_map = false,
>>   	.hybrid_bus_type = false,
>> +	.dp_window_idx = 0,
>> +	.ce_window_idx = 0,
>>   };
>>   
>>   const struct ath11k_bus_params ath11k_ahb_hybrid_bus_params = {
>> @@ -42,7 +45,10 @@ const struct ath11k_bus_params ath11k_ahb_hybrid_bus_params = {
>>   	.m3_fw_support = false,
>>   	.fixed_bdf_addr = false,
>>   	.fixed_mem_region = false,
>> +	.static_window_map = true,
>>   	.hybrid_bus_type = true,
>> +	.dp_window_idx = 1,
>> +	.ce_window_idx = 2,
>>   };
>>   
>>   #define ATH11K_IRQ_CE0_OFFSET 4
>> diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
>> index 51f313dd7f26..ee0ad93d5843 100644
>> --- a/drivers/net/wireless/ath/ath11k/core.h
>> +++ b/drivers/net/wireless/ath/ath11k/core.h
>> @@ -756,6 +756,8 @@ struct ath11k_bus_params {
>>   	bool fixed_mem_region;
>>   	bool static_window_map;
>>   	bool hybrid_bus_type;
>> +	u8 dp_window_idx;
>> +	u8 ce_window_idx;
>>   };
>>   
>>   struct ath11k_pci_ops {
>> diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
>> index ddd1e2de6a2e..9184cb893bd4 100644
>> --- a/drivers/net/wireless/ath/ath11k/pci.c
>> +++ b/drivers/net/wireless/ath/ath11k/pci.c
>> @@ -115,12 +115,26 @@ static const struct ath11k_pci_ops ath11k_pci_ops_qcn9074 = {
>>   	.window_read32 = ath11k_pci_window_read32,
>>   };
>>   
>> -static const struct ath11k_bus_params ath11k_pci_bus_params = {
>> +static const struct ath11k_bus_params ath11k_pci_bus_params_qca6390 = {
>>   	.mhi_support = true,
>>   	.m3_fw_support = true,
>>   	.fixed_bdf_addr = false,
>>   	.fixed_mem_region = false,
>> +	.static_window_map = false,
>>   	.hybrid_bus_type = false,
>> +	.dp_window_idx = 0,
>> +	.ce_window_idx = 0,
>> +};
>> +
>> +static const struct ath11k_bus_params ath11k_pci_bus_params_qcn9074 = {
>> +	.mhi_support = true,
>> +	.m3_fw_support = true,
>> +	.fixed_bdf_addr = false,
>> +	.fixed_mem_region = false,
>> +	.static_window_map = true,
>> +	.hybrid_bus_type = false,
>> +	.dp_window_idx = 3,
>> +	.ce_window_idx = 2,
>>   };
>>   
>>   static const struct ath11k_msi_config msi_config_one_msi = {
>> @@ -704,11 +718,26 @@ static int ath11k_pci_probe(struct pci_dev *pdev,
>>   {
>>   	struct ath11k_base *ab;
>>   	struct ath11k_pci *ab_pci;
>> +	const struct ath11k_bus_params *bus_params;
>>   	u32 soc_hw_version_major, soc_hw_version_minor, addr;
>>   	int ret;
>>   
>> +	switch (pci_dev->device) {
>> +	case QCA6390_DEVICE_ID:
>> +	case WCN6855_DEVICE_ID:
>> +		bus_params = &ath11k_pci_bus_params_qca6390;
>> +		break;
>> +	case QCN9074_DEVICE_ID:
>> +		bus_params = &ath11k_pci_bus_params_qcn9074;
>> +		break;
> 
> Now you are making bus_params device specific, that's not really the
> point of bus params. They are supposed to be _bus_ specific parameters.
> 
> Can't you use hw_params like I mentioned in the review?
> 

Even without this patch, as of today, bus_params is already device 
specific with QCN9074 changing the static_window_map in bus_params to 
true in ath11k_pci_probe(). And if we have to move these device specific 
bus_params to hw_parmas, then bus_params can be pretty much removed 
completely with the changes that WCN6750 bring in. Any thoughts on this? 
I can make the changes that can get along with WCN6750 series.

Thanks,
Manikanta