ath11k: does qmi support multiple soc

[fengbin]

Hello,
I have qca6390 and qcn9074 both of them works fine individually.
However when I install them together errors show up.


here is log with only 9074 installed:
[   17.759191] ath11k_pci 0000:01:00.0: qmi wifi fw qmi service
connected qmi:00000000181299d3 node:7, port:2
[   17.759197] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2709 qmi:00000000181299d3
[   17.760436] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2718 qmi:00000000181299d3
fw_ind_register completed.
[   17.761703] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2725 qmi:00000000181299d3
fw_ind_register host_cap completed.
[   17.767555] ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0x0
board_id 0xff soc_id 0xffffffff
[   17.767559] ath11k_pci 0000:01:00.0: fw_version 0x2506844c
fw_build_timestamp 2021-07-13 10:24 fw_build_id
[   19.495395] ath11k_pci 0000:01:00.0 wlp1s0: renamed from wlan0

and here is log with 6390+9074 and from the log it seems 01:00.01
device get same qmi messages twice and thus the host_cap request
failed the second time where chipset FW consider the host_cap request
is in bad state.

[   19.106915] ath11k_pci 0000:01:00.0: BAR 0: assigned [mem
0x92000000-0x921fffff 64bit]
[   19.106947] ath11k_pci 0000:01:00.0: enabling device (0100 -> 0102)
[   19.107355] ath11k_pci 0000:01:00.0: MSI vectors: 16
[   19.107366] ath11k_pci 0000:01:00.0: qcn9074 hw1.0
[   19.107505] ath11k_pci 0000:01:00.0: mhi controller registered
:0000000054128108 mhi_ctrl->index:0 mhi_ctrl->mhi_dev:mhi0
[   20.173172] ath11k_pci 0000:05:00.0: BAR 0: assigned [mem
0x91000000-0x91ffffff 64bit]
[   20.173218] ath11k_pci 0000:05:00.0: enabling device (0100 -> 0102)
[   20.173937] ath11k_pci 0000:05:00.0: MSI vectors: 32
[   20.173959] ath11k_pci 0000:05:00.0: qca6390 hw2.0
[   20.174111] ath11k_pci 0000:05:00.0: mhi controller registered
:00000000c33f02d3 mhi_ctrl->index:1 mhi_ctrl->mhi_dev:mhi1
[   20.767399] ath11k_pci 0000:01:00.0: qmi wifi fw qmi service
connected qmi:00000000e25ddf03 node:7, port:2
[   20.767423] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2709 qmi:00000000e25ddf03
[   20.768739] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2718 qmi:00000000e25ddf03
fw_ind_register completed.
[   20.770333] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2725 qmi:00000000e25ddf03
fw_ind_register host_cap completed.
[   20.770375] ath11k_pci 0000:01:00.0: qmi wifi fw qmi service
connected qmi:00000000e25ddf03 node:7, port:2
[   20.771668] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2709 qmi:00000000e25ddf03
[   20.776796] ath11k_pci 0000:01:00.0:
ath11k_qmi_event_server_arrive at 2718 qmi:00000000e25ddf03
fw_ind_register completed.
[   20.778021] ath11k_pci 0000:01:00.0: host capability request failed: 1 90


Any thoughts and ideas of what might be the cause?
thanks

-- 
arithdon